INSTALLATION
3.3 System Setup
To install your
1.Switch off all devices.
2.Connect your keyboard, monitor(s) and mouse to the Remote unit (depending on device type). Please ensure, to not swap Mouse- and Keyboard connector. The Keyboard connector is purple and the Mouse connector is green.
3.Using the supplied CPU KVM cable(s), connect the keyboard, monitor(s) and mouse connectors on the computer (or KVM switch). Please ensure, to not swap Mouse- and Keyboard connector. The Keyboard connector is purple and the Mouse connector is green.
4.Connect the interconnect cable to the INTERCONNECT socket(s)
5.Connect the 5V power supply to power the unit.
Only use the power supply originally supplied with this equipment or a
6.For a dual access system, connect the keyboard, mouse and monitor for the Local console to the appropriate ports on the Local unit. The ports may also be used to feed into a KVM switch. To the local
7.Power up the system.
17