Command format: home
Parameter: no
8.2.3 Default command
The default command sets the default settings.
>> default
The data set to default successfully.
>>
Command format: default
Parameter: none
8.2.4 Lan command
The Lan command puts the system in the Ethernet submenu.
>> lan |
|
|
> lan> |
|
|
Parameter: |
|
|
Setip: | See | 8.2.4.1 |
Show | See | 8.2.4.2 |
8.2.4.1 Setip command
The setip command sets the device IP address. This address is used for remote management of the device over Telnet or HTTP protocols.
>lan> setip> 10.0.1.205 255.0.0.0
>lan>
Command format: setip <etherip[/<masknum>]> [subnet mask]
Parameter:
Etherip: IP address of the device
Masknum: Network mask number
Subnet mask Subnet mask
8.2.4.2 Show command
The show command displays the IP configuration of the device.
> lan> show
Ethernet ip: 10.0.1.205
Subnet mask: 255.0.0.0
Version: 1.0 | Page. 48 of 95 |