8.3.14 Restart command
See 8.2.11
8.3.15 Rtable command
The rtable puts the system into the menu of routing table settings.
>>rtable > rtable>
Command format: rtable [addiproute deliproute show]
Parameter: |
|
|
Addiproute: | Deletes all | the connections. |
Deliproute: | The virtual | connection number, |
Show | displayed by the show command. | |
|
|
8.3.15.1Addiproute
The addiproute command adds a new route in the routing table.
>rtable> addiproute 198.24.67.0 216.71.89.3
>rtable>
Command format: addiproute <destip[/<masknum>]> [<submask>] <gatewayip>
Parameter: |
|
|
Destip[/<masknum: | Address / destination network mask. | |
Submask: | Subnet. |
|
Gatewayip | Gateway | IP address. |
8.3.15.2Deliproute
The deliproute command deletes a route in the routing table.
>rtable> deliproute all
>rtable>
Command format: deliproute <all><number>
Version: 1.0 | Page. 77 of 95 |