5250 ADAPTER CARDS: HARDWARE INSTALLATION MANUAL
SYSTEM.INI file. The entry can also be added by using any text editor and adding the following line to the [386Enh] section:
Device=CEM5250.386
Once installed, the CEM5250.386 VxD will be loaded from the Windows startup files. The system must be rebooted in order for this change to take effect. Do not use this file on Windows 95/98 systems.
5.5.3TWINAXOEM.SYS
There is a Windows NT® device driver called TwinaxOEM.sys located in the install directory (default, C:\5250CARD). At system boot time, this driver will automatically reserve resources for the Adapter. This driver is also compatible with applications such as Client Access 95/NT Mod 3 and NetSoft/NetManage Router for AS/400 Version 3.10. Do not use this file on Windows 3.1 or 95/98 systems.
5.6 5250 Windows Diagnostics
The Windows utility diskette contains a Windows 95/98 and Windows 3.1 diagnostic program for the Adapter Card. For Windows NT® 3.51 and NT 4.0 you will need to create a DOS bootable floppy on a DOS or Windows 95/98 system and then use the “Make Diagnostic Diskette” icon to copy the DOS diagnostic programs to the DOS bootable floppy. Then reboot from this floppy and follow the instructions in Section 5.7.
5.6.116 BIT WINDOWS DIAGNOSTICS
By default, a
28