IBM Z10 EC manual Internal Battery Feature Recommendation

Page 56

Prior to this enhancement, the PTS, BTS, and Arbiter roles had to be reassigned manually using the System (Sysplex) Time task on the HMC. For additional details on the API, please refer to System z Application Programming Inter- faces, SB10-7030-11.

Additional information is available on the STP Web page: http://www.ibm.com/systems/z/pso/stp.html.

The following Redbooks are available at the Redbooks Web site: http://www.redbooks.ibm.com/.

Server Time Protocol Planning Guide, SG24-7280

Server Time Protocol Implementation Guide, SG24-7281

Internal Battery Feature Recommendation

Single data center

CTN with 2 servers, install IBF on at least the PTS/CTS

Also recommend IBF on BTS to provide recovery pro- tection when BTS is the CTS

CTN with 3 or more servers IBF not required for STP recovery, if Arbiter confi gured

Two data centers

CTN with 2 servers (one in each data center) install IBF on at least the PTS/CTS

Also recommend IBF on BTS to provide recovery protection when BTS is the CTS

CTN with 3 or more servers, install IBF on at least the

PTS/CTS

Also recommend IBF on BTS to provide recovery pro- tection when BTS is the CTS

Message Time Ordering (Sysplex Timer Connectivity to Coupling

Facilities)

As processor and Coupling Facility link technologies have improved, the requirement for time synchronization toler- ance between systems in a Parallel Sysplex environment has become ever more rigorous. In order to enable any exchange of time stamped information between systems in a sysplex involving the Coupling Facility to observe the correct time ordering, time stamps are now included in the message-transfer protocol between the systems and the Coupling Facility. Therefore, when a Coupling Facility is confi gured on any System z10 or System z9, the Cou- pling Facility will require connectivity to the same 9037 Sysplex Timer or Server Time Protocol (STP) confi gured Coordinated Timing Network (CTN) that the systems in its Parallel Sysplex cluster are using for time synchroniza- tion. If the ICF is on the same server as a member of its Parallel Sysplex environment, no additional connectivity is required, since the server already has connectivity to the Sysplex Timer.

However, when an ICF is confi gured on any z10 which does not host any systems in the same Parallel Sysplex cluster, it is necessary to attach the server to the 9037 Sysplex Timer or implement STP.

Image 56
Contents IBM System z10 Enterprise Class z10 EC Reference Guide Table of Contents IBM System z10 Enterprise Class z10 EC Overview Just-in-time deployment of IT resources Specialty engines offer an attractive alternativeOrder of introduction Numerical computing on the chipArchitecture Liberating your assets with System zEvolving for your business Z10 EC ArchitecturePage Commitment to system integrity Page Linux on System z VSETPF Z10 EC Operating System ESA/390Page Page Z10 EC Design and Technology Z10 EC Model Z10 EC model upgrades Z10 EC Base and Sub-capacity OfferingsCPU Measurement Facility Z10 EC PerformanceLarge System Performance Reference Z10 EC I/O Subsystem System I/O Configuration AnalyzerZ10 EC Channels and I/O Connectivity Concurrent Update Ficon Express4 and Ficon Express2 PerformanceSupport of Spanned Channels and Logical Partitions Modes of OperationFCP increased performance for small block sizes Ficon Support for Cascaded DirectorsFCP Channels Scsi IPL now a base function FCP Full fabric connectivityFicon and FCP for connectivity to disk, tape, and printers Platform and name server registration in Ficon channelIt will register NPort ID Virtualization Program Directed re-IPLPort density or granularity Feature Infrastructure Ports perOSA-Express3 Ethernet features Summary of benefits Features OSA-Express2 availabilityPurpose/Traffic TypeOSA-Express3 10 Gigabit Ethernet SR OSA-Express3 Gigabit Ethernet LXOSA-Express3 Gigabit Ethernet SX Four-port exploitation on OSA-Express3 GbE SX and LXNetwork Traffic Analyzer Dynamic LAN idle for z/OSLink aggregation for z/VM in Layer 2 mode Layer 2 transport mode When would it be used?Direct Memory Access DMA OSA Layer 3 Virtual MAC for z/OSHardware data router IBM Communication Controller for Linux CCLOSA/SF Virtual MAC and Vlan id Display Capability OSA Integrated Console ControllerRemove L2/L3 LPAR-to-LPAR Restriction HiperSockets HiperSockets Enhancement for zIIP Exploitation CP Assist for Cryptographic Function Cpacf Security CryptographyCan Do IT securely Configurable Crypto Express2 Dynamically add crypto to a logical partition Secure Key AESTKE 5.3 workstation and support for Smart Card Reader Enhancement with TKE 5.3 LICTKE additional smart cards System z10 EC cryptographic migrationImproved Key Exchange With Non-CCA Cryptographic Systems Remote Loading of Initial ATM KeysRemote Key Loading Benefits On Demand Capabilities Capacity on Demand Temporary CapacityAmendment for CBU Tests Capacity Provisioning OS Capacity provisioning allows you to set up rules System z9 System z10Reliability, Availability, and Serviceability RAS RAS Design FocusEnhanced Book Availability Availability FunctionsHardware System Area HSA Concurrent Physical Memory Upgrade Concurrent Physical Memory ReplacementConcurrent Defective Book Replacement Enhanced Driver MaintenanceTransparent Sparing Plan Ahead MemoryService Enhancements Power MonitoringPower Estimation Tool Environmental EnhancementsParallel Sysplex Cluster Technology IBM Systems Director Active Energy ManagerImproved service time with Coupling Facility Duplex Coupling Facility Control Code Cfcc LevelParallel Sysplex Coupling Connectivity Coupling Facility Configuration AlternativesSystem-Managed CF Structure Duplexing Introducing long reach InfiniBand coupling links Coupling Connectivity for Parallel SysplexZ10 Coupling Link Options Z10 EC MaxPreview Improved STP System Management with Time synchronization and time accuracy on z10 ECServer Time Protocol STP Enhanced Network Time Protocol NTP client support Continuous availability of NTP servers used as ExterApplication Programming Interface API to automate Enhanced STP recovery when Internal Battery FeatureNTP server on Hardware Management Console HMC Internal Battery Feature Recommendation HMC System Support Family Machine TypeInternet Protocol, Version 6 IPv6 HMC/SE Console MessengerHMC z/VM Tower systems management enhancements Implementation Services for Parallel Sysplex GdpsFiber Quick Connect for Ficon LX Environments Z10 EC Physical Characteristics Z10 EC Configuration Detail Z10 EC Dimensions Z9 EC Number of Frames 2 FrameZ10 EC Environmentals Model O Cage Model O CageProcessor Unit Features Model OSA-Express3 and OSA-Express2 Features Min MaxCPs IFLs ICFsGeneral Information Coupling Facility CF Level of Support Z9 BCStatement of Direction Resource Link PublicationsFollowing Redbook publications are available now ZSO03018-USEN-02