IBM xSeries 235 manual Start Options, Advanced Setup, System Partition Visibility, Memory Settings

Page 30

vStart Options

Select this choice to view or change the start options. This choice appears only on the full Configuration/Setup Utility main menu. Start options take effect when you start your server.

You can select keyboard operating characteristics, such as the keyboard speed. You also can specify whether the keyboard number lock starts on or off. You also can enable the server to issue error messages when it is run without a diskette drive, monitor, or keyboard.

The server uses a startup sequence to determine the device from which the operating system is loaded. For example, you can define a startup sequence that checks for a startable diskette in the diskette drive, then checks the hard disk drive in bay 0, and then checks a network adapter.

If your server contains Wake on LAN hardware and software and your operating system supports Wake on LAN functions, you can also define a startup sequence for the Wake on LAN functions.

If the Boot Fail Count choice is enabled, you can restore the BIOS system defaults after three consecutive boot failures. If this choice is disabled, the BIOS system defaults can be loaded only from the Configuration/Setup Utility main menu.

You also can select whether the integrated SCSI controller with RAID capabilities or a PCI SCSI adapter is given boot precedence. Select Planar SCSI to give the integrated SCSI controller with RAID capabilities boot precedence. If a PCI SCSI adapter is to be given boot precedence, select the slot number where this adapter is installed.

You can enable a virus-detection test that checks for changes in the master boot record at startup.

vAdvanced Setup

Select this choice to change values for advanced hardware features, such as cache control, and PCI configuration. This choice appears only on the full Configuration/Setup Utility main menu.

A warning message appears above the choices on this menu to alert you that the system might malfunction if these options are configured incorrectly. Follow the instructions on the screen carefully.

–System Partition Visibility

Select this choice to indicate whether the System Partition is visible. To make the System Partition visible, set this choice to Visible. To make the System Partition invisible, set this choice to Hidden. See “Using the ServerGuide Setup and Installation CD” on page 22 for additional information about the System Partition.

–Memory Settings

Select this choice to manually enable a pair of memory connectors.

If a memory error is detected during POST or memory configuration, the server will automatically disable the failing pair of memory connectors and continue operating with reduced memory capacity. If this occurs, you must manually enable the set of memory connectors after the problem is corrected. Select Memory Settings from the Advanced Setup menu, and use the arrow keys to highlight the pair of memory connectors that you want to enable; then, use the arrow keys to select Enable.

18IBM xSeries 235 Type 8671: User’s Guide

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Users Guide Page User’s Guide Page Contents Iv IBM xSeries 235 Type 8671 User’s Guide Safety Vi IBM xSeries 235 Type 8671 User’s Guide Statement 82 kg 180 lb Safety Statement Following label indicates moving parts nearby Introducing the IBM xSeries 235 Type 8671 server Related PublicationsIBM xSeries 235 Type 8671 User’s Guide Features and specifications Features and specificationsWhat your server offers Redundant connection Reliability, availability, and serviceabilityIntegrated network environment support IBM DirectorIBM Director UpdateXpress program Systems Management Director PackageIBM Universal Manageability Front view Server controls and indicatorsRack configuration Tower modelIntroducing the IBM xSeries 235 Type 8671 server Server with fixed power supply Server with hot-swap power suppliesRear view Operator information panel Server power features Turning on the serverTurning off the server Standby mode Configuring your server Choices available from the Configuration/Setup main menu Using the Configuration/Setup Utility programStarting the Configuration/Setup Utility program System SummarySystem Information Power-on PasswordAdministrator Password Product DataStart Options Advanced SetupMemory Settings System Partition VisibilityRestore Settings Integrated System Management Processor SettingsError Logs Load Default SettingsUsing passwords Remote Control Security SettingsPower-on password override switch Using the LSI Logic Configuration Utility program Administrator passwordStarting the LSI Logic Configuration Utility program Using the ServerGuide Setup and Installation CDFormatting a Scsi hard disk drive ServerGuide features Setup and configuration overviewSystem Partition Typical operating-system installation Setting up or updating multiple serversInstalling your operating system without ServerGuide Using ServeRAID Manager Configuring the Gigabit Ethernet controller Ethernet port connectorHigh-performance Ethernet modes Updating the integrated system management firmware Appendix A. Getting help and technical assistance Before you callSoftware service and support Hardware service and support Appendix B. Warranty information Warranty periodProblem determination Warranty service and support Checking softwareInternational Warranty Service Purchasing additional servicesWarranties of ANY Kind Appendix B. Warranty information Part 2 Country-unique Terms Americas BrazilAustralia India Following Terms Apply to ALL Emea Countries Following Terms Apply to the Country Specified Italy Following item is added to this paragraph Appendix C. Notices Edition noticeTrademarks Important notesAppendix C. Notices Taiwan electrical emission statement Industry Canada Class a emission compliance statementEuropean Union EMC Directive conformance statement Avis de conformité à la réglementation d’Industrie CanadaAppendix C. Notices IBM xSeries 235 Type 8671 User’s Guide Index LEDs Index IBM xSeries 235 Type 8671 User’s Guide Page Part Number 25R4645

xSeries 235 specifications

The IBM xSeries 235 is a distinguished server model designed to cater to the needs of small and medium-sized businesses, offering a blend of performance, scalability, and manageability. This versatile server is powered by Intel's Xeon processors, providing robust processing capabilities that can handle a variety of workloads efficiently.

One of the main features of the xSeries 235 is its dual-processor architecture, which allows for increased computational power. This configuration can support up to two Intel Xeon processors, making it well-suited for multitasking environments where performance is crucial. Additionally, it offers support for up to 8GB of RAM, enabling it to manage multiple applications simultaneously and ensure smooth operation under load.

In terms of storage, the xSeries 235 accommodates several hard drive configurations. It supports a mix of SCSI and SATA drives, allowing users to choose the storage solution that best meets their performance and capacity needs. The server’s RAID capabilities further enhance data protection and availability, offering Options such as RAID 0, 1, 1E, 5, and 10 for flexible and reliable storage management.

The xSeries 235 is built on IBM's Enterprise X-Architecture, which brings advanced features such as Hot-Swap drive bays and redundant power supplies. These features ensure higher reliability and uptime, making it a dependable choice for critical business applications. The server also incorporates built-in management tools through the IBM Director software, providing administrators with the ability to monitor, manage, and streamline server operations effectively.

Furthermore, the xSeries 235's compact 1U form factor facilitates easy deployment in data center environments with limited space. This space-efficient design does not compromise on performance, as it can still deliver significant computational resources without the bulk of traditional servers.

The server also emphasizes energy efficiency, aligning with the increasing demand for environmentally friendly technology solutions. It is designed to minimize power consumption while maintaining high performance, contributing to lower operational costs for businesses.

Overall, the IBM xSeries 235 stands out as a reliable and cost-effective server solution, ideal for businesses looking to enhance their IT infrastructure without overshooting their budget. Its combination of processing power, storage flexibility, and enterprise-grade features encapsulates why it remains a preferred choice for many organizations.
Top Page Image Contents