IBM xSeries 235 manual Using passwords, Remote Control Security Settings

Page 32

vRemote Control Security Settings

Select this choice to set a remote-control password. When you set a remote-control password, you can also set the number of failed attempts to enter the correct remote-control password, and the duration before another attempt is allowed.

For a list of supported options for your server, go to http://www.ibm.com/pc/us/compat/ on the World Wide Web. To order an optional Remote Supervisor Adapter, contact your IBM marketing representative or authorized reseller.

Using passwords

The System Security choice appears only on the full Configuration/Setup Utility menu. After you select this choice, you can implement two levels of password protection: power-on password and administrator password. The administrator password is available only if the optional IBM Remote Supervisor Adapter is installed in your server.

Power-on password

After you set a power-on password, you can enable the Unattended Start mode. This locks the keyboard and mouse but enables the operating system to start. The keyboard and mouse remain locked until you type the correct password.

You can use any combination of up to seven characters (A–Z, a–z, and 0–9) for your power-on password. Keep a record of your password in a secure place. When a power-on password is set, POST is not completed until you type the password. If you forget the power-on password, you can regain access to the server through one of the following methods:

vIf an administrator password is set, type the administrator password at the power-on prompt. (If necessary, see “Administrator password” on page 21 for details.) Start the Configuration/Setup Utility program and change the power-on password.

vRemove the battery and then reinstall the battery (see the Option Installation Guide on the IBM xSeries Documentation CD for instructions).

vChange the position of the power-on password override switch (switch 6 on switch block 1) as described below to bypass the power-on password check. You can then start the Configuration/Setup Utility program and change the power-on password.

Notes:

1.Before changing any switch settings or moving any jumpers, turn off the server; then, disconnect all power cords and external cables. (Review the information in “Safety” on page v and “Turning off the server” on page 13.)

2.Any system-board switch or jumper blocks that are not shown in the illustrations in this book are reserved.

Power-on password override (switch 6)

Changing the position of this switch bypasses the power-on password check the next time the server is powered on. You do not need to move the switch back after the password is overridden. The default position is Off. To bypass the power-on password check, move the switch to the opposite position. Changing the position of this switch does not affect the administrator password check if an administrator password is set.

20IBM xSeries 235 Type 8671: User’s Guide

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Users Guide Page User’s Guide Page Contents Iv IBM xSeries 235 Type 8671 User’s Guide Safety Vi IBM xSeries 235 Type 8671 User’s Guide Statement 82 kg 180 lb Safety Statement Following label indicates moving parts nearby Introducing the IBM xSeries 235 Type 8671 server Related PublicationsIBM xSeries 235 Type 8671 User’s Guide Features and specifications Features and specificationsWhat your server offers Reliability, availability, and serviceability Integrated network environment supportRedundant connection IBM DirectorIBM Director IBM Universal Manageability UpdateXpress programSystems Management Director Package Server controls and indicators Rack configurationFront view Tower modelIntroducing the IBM xSeries 235 Type 8671 server Rear view Server with fixed power supplyServer with hot-swap power supplies Operator information panel Server power features Turning on the serverTurning off the server Standby mode Configuring your server Using the Configuration/Setup Utility program Starting the Configuration/Setup Utility programChoices available from the Configuration/Setup main menu System SummaryPower-on Password Administrator PasswordSystem Information Product DataAdvanced Setup Memory SettingsStart Options System Partition VisibilityIntegrated System Management Processor Settings Error LogsRestore Settings Load Default SettingsPower-on password override switch Using passwordsRemote Control Security Settings Using the LSI Logic Configuration Utility program Administrator passwordFormatting a Scsi hard disk drive Starting the LSI Logic Configuration Utility programUsing the ServerGuide Setup and Installation CD ServerGuide features Setup and configuration overviewSystem Partition Installing your operating system without ServerGuide Typical operating-system installationSetting up or updating multiple servers Using ServeRAID Manager High-performance Ethernet modes Configuring the Gigabit Ethernet controllerEthernet port connector Updating the integrated system management firmware Appendix A. Getting help and technical assistance Before you callSoftware service and support Hardware service and support Problem determination Appendix B. Warranty informationWarranty period Warranty service and support Checking softwareInternational Warranty Service Purchasing additional servicesWarranties of ANY Kind Appendix B. Warranty information Part 2 Country-unique Terms Americas BrazilAustralia India Following Terms Apply to ALL Emea Countries Following Terms Apply to the Country Specified Italy Following item is added to this paragraph Appendix C. Notices Edition noticeTrademarks Important notesAppendix C. Notices Industry Canada Class a emission compliance statement European Union EMC Directive conformance statementTaiwan electrical emission statement Avis de conformité à la réglementation d’Industrie CanadaAppendix C. Notices IBM xSeries 235 Type 8671 User’s Guide Index LEDs Index IBM xSeries 235 Type 8671 User’s Guide Page Part Number 25R4645

xSeries 235 specifications

The IBM xSeries 235 is a distinguished server model designed to cater to the needs of small and medium-sized businesses, offering a blend of performance, scalability, and manageability. This versatile server is powered by Intel's Xeon processors, providing robust processing capabilities that can handle a variety of workloads efficiently.

One of the main features of the xSeries 235 is its dual-processor architecture, which allows for increased computational power. This configuration can support up to two Intel Xeon processors, making it well-suited for multitasking environments where performance is crucial. Additionally, it offers support for up to 8GB of RAM, enabling it to manage multiple applications simultaneously and ensure smooth operation under load.

In terms of storage, the xSeries 235 accommodates several hard drive configurations. It supports a mix of SCSI and SATA drives, allowing users to choose the storage solution that best meets their performance and capacity needs. The server’s RAID capabilities further enhance data protection and availability, offering Options such as RAID 0, 1, 1E, 5, and 10 for flexible and reliable storage management.

The xSeries 235 is built on IBM's Enterprise X-Architecture, which brings advanced features such as Hot-Swap drive bays and redundant power supplies. These features ensure higher reliability and uptime, making it a dependable choice for critical business applications. The server also incorporates built-in management tools through the IBM Director software, providing administrators with the ability to monitor, manage, and streamline server operations effectively.

Furthermore, the xSeries 235's compact 1U form factor facilitates easy deployment in data center environments with limited space. This space-efficient design does not compromise on performance, as it can still deliver significant computational resources without the bulk of traditional servers.

The server also emphasizes energy efficiency, aligning with the increasing demand for environmentally friendly technology solutions. It is designed to minimize power consumption while maintaining high performance, contributing to lower operational costs for businesses.

Overall, the IBM xSeries 235 stands out as a reliable and cost-effective server solution, ideal for businesses looking to enhance their IT infrastructure without overshooting their budget. Its combination of processing power, storage flexibility, and enterprise-grade features encapsulates why it remains a preferred choice for many organizations.
Top Page Image Contents