IBM xSeries 235 Typical operating-system installation, Setting up or updating multiple servers

Page 37

Typical operating-system installation

You can use the ServerGuide program to shorten your installation time. The ServerGuide program provides the device drivers that are required for your hardware and for the operating system that you are installing. This section describes a typical ServerGuide operating-system installation.

Note: Features and functions can vary slightly with different versions of the

ServerGuide program.

1.After you have completed the setup process, the operating-system installation program starts. (You will need your operating-system CD to complete the installation.)

2.The ServerGuide program stores information about the server model, service processor, hard disk drive controllers, and network adapters. Then, the program checks the CD for newer device drivers. This information is stored and then passed to the operating-system installation program.

3.With some operating-system installations, you can create an operating-system replication diskette for setting up additional servers. This diskette contains the Internet protocol (IP) address, server name, and other selections.

4.The ServerGuide program presents operating-system partition options that are based on your operating-system selection and the installed hard disk drives.

5.If you are installing the operating system from diskettes, the ServerGuide program lists the diskettes that you must create and the optional device-driver diskettes (for installed adapters or controllers) that you might want to create.

6.The ServerGuide program prompts you to insert your operating-system CD and restart the server. At this point, the installation program for the operating system takes control to complete the installation.

Setting up or updating multiple servers

You can use the ServerGuide program to create diskettes that help you set up or update multiple servers. You can modify information on the diskettes as you use them to set up or update other servers.

Note: Availability and function can vary by server model and by the hardware that is installed.

You can create a setup-replication diskette, which contains your hardware configuration selections. Use this diskette to replicate selections to other servers that are of the same model.

You can create an operating-system replication diskette, which contains information that you need to complete multiple installations. Not all operating systems support operating-system replication diskettes.

Installing your operating system without ServerGuide

If you have already configured the server hardware and you decide not to use the ServerGuide program to install your operating system, complete the following steps to download the latest operating-system installation instructions from the IBM Support Web page:

1.Go to http://www.ibm.com/pc/support/.

2.Under Browse, click Servers.

3.From the Family drop-down list, select your server model.

Chapter 2. Configuring your server 25

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Users Guide Page User’s Guide Page Contents Iv IBM xSeries 235 Type 8671 User’s Guide Safety Vi IBM xSeries 235 Type 8671 User’s Guide Statement 82 kg 180 lb Safety Statement Following label indicates moving parts nearby Related Publications Introducing the IBM xSeries 235 Type 8671 serverIBM xSeries 235 Type 8671 User’s Guide Features and specifications Features and specificationsWhat your server offers Integrated network environment support Reliability, availability, and serviceabilityRedundant connection IBM DirectorIBM Director Systems Management Director Package UpdateXpress programIBM Universal Manageability Rack configuration Server controls and indicatorsFront view Tower modelIntroducing the IBM xSeries 235 Type 8671 server Server with hot-swap power supplies Server with fixed power supplyRear view Operator information panel Turning on the server Server power featuresTurning off the server Standby mode Configuring your server Starting the Configuration/Setup Utility program Using the Configuration/Setup Utility programChoices available from the Configuration/Setup main menu System SummaryAdministrator Password Power-on PasswordSystem Information Product DataMemory Settings Advanced SetupStart Options System Partition VisibilityError Logs Integrated System Management Processor SettingsRestore Settings Load Default SettingsRemote Control Security Settings Using passwordsPower-on password override switch Administrator password Using the LSI Logic Configuration Utility programUsing the ServerGuide Setup and Installation CD Starting the LSI Logic Configuration Utility programFormatting a Scsi hard disk drive Setup and configuration overview ServerGuide featuresSystem Partition Setting up or updating multiple servers Typical operating-system installationInstalling your operating system without ServerGuide Using ServeRAID Manager Ethernet port connector Configuring the Gigabit Ethernet controllerHigh-performance Ethernet modes Updating the integrated system management firmware Before you call Appendix A. Getting help and technical assistanceSoftware service and support Hardware service and support Warranty period Appendix B. Warranty informationProblem determination Checking software Warranty service and supportPurchasing additional services International Warranty ServiceWarranties of ANY Kind Appendix B. Warranty information Americas Brazil Part 2 Country-unique TermsAustralia India Following Terms Apply to ALL Emea Countries Following Terms Apply to the Country Specified Italy Following item is added to this paragraph Edition notice Appendix C. NoticesImportant notes TrademarksAppendix C. Notices European Union EMC Directive conformance statement Industry Canada Class a emission compliance statementTaiwan electrical emission statement Avis de conformité à la réglementation d’Industrie CanadaAppendix C. Notices IBM xSeries 235 Type 8671 User’s Guide Index LEDs Index IBM xSeries 235 Type 8671 User’s Guide Page Part Number 25R4645

xSeries 235 specifications

The IBM xSeries 235 is a distinguished server model designed to cater to the needs of small and medium-sized businesses, offering a blend of performance, scalability, and manageability. This versatile server is powered by Intel's Xeon processors, providing robust processing capabilities that can handle a variety of workloads efficiently.

One of the main features of the xSeries 235 is its dual-processor architecture, which allows for increased computational power. This configuration can support up to two Intel Xeon processors, making it well-suited for multitasking environments where performance is crucial. Additionally, it offers support for up to 8GB of RAM, enabling it to manage multiple applications simultaneously and ensure smooth operation under load.

In terms of storage, the xSeries 235 accommodates several hard drive configurations. It supports a mix of SCSI and SATA drives, allowing users to choose the storage solution that best meets their performance and capacity needs. The server’s RAID capabilities further enhance data protection and availability, offering Options such as RAID 0, 1, 1E, 5, and 10 for flexible and reliable storage management.

The xSeries 235 is built on IBM's Enterprise X-Architecture, which brings advanced features such as Hot-Swap drive bays and redundant power supplies. These features ensure higher reliability and uptime, making it a dependable choice for critical business applications. The server also incorporates built-in management tools through the IBM Director software, providing administrators with the ability to monitor, manage, and streamline server operations effectively.

Furthermore, the xSeries 235's compact 1U form factor facilitates easy deployment in data center environments with limited space. This space-efficient design does not compromise on performance, as it can still deliver significant computational resources without the bulk of traditional servers.

The server also emphasizes energy efficiency, aligning with the increasing demand for environmentally friendly technology solutions. It is designed to minimize power consumption while maintaining high performance, contributing to lower operational costs for businesses.

Overall, the IBM xSeries 235 stands out as a reliable and cost-effective server solution, ideal for businesses looking to enhance their IT infrastructure without overshooting their budget. Its combination of processing power, storage flexibility, and enterprise-grade features encapsulates why it remains a preferred choice for many organizations.
Top Page Image Contents