Xerox 75 MX Recommendations for handling, loading, and storing paper, GBC stock, Sameceda

Operator GuidePaper and other stock

Table 5-6. Recommendations for loading special stock

Stock Type	Common Use	Recommendation
Labels	Self-adhesive	• Do not duplex.
	labels for	• Feed labels into the printer
	envelopes and
		LEF only.
	packaging
		Labels pose a special problem
		because, depending on the
		number of labels per sheet,
		there is an opportunity for the
		label to separate from the
		backing while inside the
		printer.
		• Load face-up in Trays 1-4.
		• Load face-down in Trays 5-6.
GBC stock	Plastic comb or	• Load with slotted holes
(Sameceda)	strap binding via	inboard; for example, load
	slotted holes or	SEF when the holes are down
	rectangles at	the long edge.
	frequent intervals	• Loading with holes on the
	along the long
		lead-edge (LEF) or the trail-
	edge (the bind
		edge (LEF) is not supported,
	edge)
		but may work well for some
		stock depending upon the size
		and number of the holes and
		how they affect the sensors in
		the printer; therefore, if you
		intend to use LEF you should
		run a sample of the stock to
		confirm its acceptability before
		running the job.

Recommendations for handling, loading, and storing paper

Give your paper the proper handling, loading, and storage.

DocuTech/DocuPrint 75/90 and DocuPrint 75 MX 5-11