Xerox 701P98048 manual Lphqvlrqv, 3ULQWHUPHGLDLQIRUPDWLRQ, 6WDFNHUFDSDFLW, Ohfwulfdouhtxluhphqwv

'LPHQVLRQV

:HLJKW￿ 100 lbs. (45.5 kg) +HLJKW￿ 37.9 inches (963 mm) :LGWK￿ 52.8 inches (1341 mm) 'HSWK￿ 44.6 inches (1133 mm)

3ULQWHU￿PHGLD￿LQIRUPDWLRQ

0HGLD￿W\SH￿

∙Bond (20 lb.)

∙Vellum (20 lb.)

∙Film (4 mil.)

∙Tracing (4 mil)

0HGLD￿VL]H￿

∙Roll Feed - 11 inches to 36 inches (279.4 mm to 914.4 mm) width 3 inches (76.2 mm) core diameter to 6.7 inches (170.2 mm) O.D.)

6WDFNHU￿FDSDFLW\

Maximum of 1000 prints of various sizes

Maximum of 750 D-size (A1) prints

Maximum of 375 E-size (A0) prints

(OHFWULFDO￿UHTXLUHPHQWV

9ROWDJH￿	85-264 VAC
)UHTXHQF\￿	47-440 Hz
6WDQGE\￿&XUUHQW￿		0 Amps
5XQQLQJ￿&XUUHQW￿		0.8 Amps (115 VAC) for USA and Canada

0.5 Amps (250 VAC) for EO

The stacker is designed to operate either on a 15 A (115 VAC), 60 Hz for the USA and Canada or on a 20 A (240 VAC), 50 Hz for EO, single phase line with a circuit breaker. A standard 15A or 20A, three-prong, grounded receptacle is required.

Stacker 1000 Operator Manual	9
Technical data