Moving the stacker
Problem solving
Whenever you are required to move the stacker away from the printer, perform the following steps:
1.Move the stacker by pulling the entire stacker outward and away from the printer.
2.Reposition the stacker against the printer and ensure that the stacker is positioned correctly:
The stacker must be resting against the printer and aligned with the output area of the printer.
Problem
The stacker is not functioning.
Prints have stopped feeding into the stacker.
Action
Ensure that the power cord is connected to the power outlet. Disconnect and reconnect the cord to the outlet. If the problem continues, call for service.
Check for a media jam in the stacker and/or the printer, and clear any media jams. If the problem continues, call for service.
Stacker 1000 Operator Manual | 7 |
Problem solving |
|