Cleaning
Sensor Q1164
Sensor Q1164 is on the last feeder/stacker module (the one containing the purge tray), as shown below. Clean the sensor gently, with a cleaning pad.
Cleaning the 4mm cartridge tape drive
Clean the 4mm cartridge tape drive every 25 hours of actual tape operation. Use only a cleaning cartridge designed for the 4mm cartridge tape drive. No fluids or other preparations are necessary with the use of these cartridges.
CAUTION
Do not use cleaning cartridges or any types of fluids designed for use in audio devices as these can damage your tape drive.
To clean the tape drive:
1.Insert the cleaning cartridge into the tape drive as you would a data tape cartridge.
Guide to Performing Routine Maintenance |