ABOUT PAPER
Moisture content
Moisture content directly affects reliability and image quality.
•Too much moisture can cause excessive paper curl, paper jams, and image quality problems. Moisture levels that are too low can cause static problems, which can also result in paper jams.
•Moisture content must be uniform within the ream. The ream should not be allowed to lose or absorb moisture during storage.
•A moisture level range of 4.0 to 5.0% is recommended for paper used in a copier/printer.
Electrical properties (conductivity and resistivity)
Paper that is highly conductive causes image deletion and paper jams. Highly resistive paper, on the other hand, causes static build- up between paper sheets, leading to
Xerox papers have the correct balance to provide you with optimum performance.
Surface strength
For a paper to have acceptable surface strength, fibers and chemicals must be bonded well to its surface. Loose fibers and other materials within paper can cause developer contamination that can further cause premature developer failure in Xerox printers/copiers.
COLOR MATERIALS USAGE GUIDE | Visit our website at www.xerox.com | 13 |