Philips SDV7700K/17 user manual Included with Antenna, Parts included, Assembly of UHF Portion

Included with Antenna

EN

	Parts included:
	a. UHF Boom-A		. 2
	b. UHF Boom-B		. 2
	c. VHF Boom-A		. 1
	d. VHF Boom-B		. 2
Note: For final installation and	e. Reflector Elements		. 2
connection of your antenna, addi-	f.	46˝ Element	. 2
tional hardware may be required.	g.	50˝ Element	. 2
B e fo re starting assembly, please	h.	Tubing Brace	. 2
read through the instructions care-	j.	Phasing Wire	. 2
fully to determine your specific	k.	Reflector Brackets	. 2
requirements.	l.	Pivot Brackets	. 4
	n.	Locking Brackets	. 4
	p.	End Caps	. 8
	q.	Screws (1-3/4˝)	. 5
	r.	Screws (1-1/2˝)	10
	s.	Screws (3/4˝)	. 2
	t.	Lock Washers/ Washers	6, 4
	u.	Wing-Nuts	17
	v.	Nuts	. 6
	w.	Band Separator	. 1
	x.	U-Bolt	. 3
	y.	Cross Piece (for U-Bolt Assembly)	3
	z. Antenna Saddle		. 1
	*Quantities listed include those which may already be attached to antenna
	NOTE: Cable, mast and mounting brackets are not included.

Assembly

Assembly of UHF Portion

•Rotate reflector element rods into place. NOTE: When rotating element rods, grasp close to pivot and relieve spring pressure on pivot bracket detents. Don’t apply excess pres- sure to reflector element rods.

5