Philips SDV2940, SDV2927 user manual EN Mounting Instructions, For outdoor mast mount installation

SDV2940_27_manualV3.qxd 5/5/08 4:01 PM Page 6

EN Mounting Instructions

fig.3

fig.4

fig.5

3.Attach the main body and L-bracket to wall / mast mounting bracket using cross head screw (fig. 3) note the orientation of the bracket. ) Do not fully tighten this screw to allow for later adjustment (fig. 3).

4.Tighten all screws and nuts to firmly affix the antenna to the wall.

5.Attach the cable to the F connector on the underside of the unit and weather protection boot over the connection.

See next steps under – Connections to your TV

For outdoor mast mount installation:

NOTE: Do all antenna assembly work on the ground. Raise the completed antenna after assembly.

1.Insert U-Bolts into the holes of the wall/mast bracket (fig. 4).

2.Slide the mast clamps onto the U-Bolts (fig. 4).

3.Attach the 4 nuts with lock washers to the U-Bolts - do not tighten fully (fig. 4).

4.Slide the assembly on to the mast. Do not tighten fully, just snug enough for the assembly to stay in place (fig. 5).

5.Attach the L-Bracket to the wall / mast bracket using cross head screw and nut, Note the orientation of the bracket. Fully tighten this screw.

6.Attach the main body of the antenna to L bracket vertically.

7.Tighten all screws and nuts to firmly affix the antenna to the mast.

8.Adjustment of the antenna direction will be done by rotating the mast in its mount.

9.Attach the cable to the ‘F’ connector on the underside of the unit and weather protection boot over the connection (fig.6).

fig.6

6