dbx Pro 386 user manual Digital Applications Digital Output Front Functions

Page 18

Section 3

386

Digital Applications

3.1 Digital Output Front Functions of the 386

Dither Switch

This switch is used to select the dither type algorithms including: TPDF, SNR2 , or None. Dither is random noise that is added to the audio signal which effectively eliminates the harmonic distor- tion created by truncation. See the“Truncation” graph in section D.2 of the Appendix. The LED will be lit RED for the SNR2 or GREEN for the TPDF dither algorithm. When the LED is off, dither- ing is not in use.

Shape Switch

This switch selects the Shape 1, or Shape 2 psycho-acoustic noise-shaping curve. Shape 1 uti- lizes a mild psycho-acoustic curve, while the curve used in Shape 2 tends to be more aggres- sive. Please see the "Noise Shaping" graph in section D.1 of the appendix. The LED will be lit GREEN for Shape 1 and RED for Shape 2. When the LED is off, the noise-shaping algorithm is not in use.

Sample Rate Switch

This switch selects the digital output sample rate of either: 44.1, 48, 88.2, or 96 kHz. The LED will not be lit for 44.1 kHz, GREEN for 48 kHz, RED for 88.2 kHz and YELLOW for 96 kHz.

Word Length Switch

Selects output wordlength of 16, 20, or 24 bits output resolution. The LED will not be lit for 16 bit, GREEN for 20 bit, and RED for 24 bit.

Output Format

Selects either the AES/EBU or S/PDIF digital output format. The LED will be red for AES/EBU and green for S/PDIF.

3.2 Digital Output Rear Panel Connections

®

10

386 User Manual

 

 

Image 18
Contents 386 Important Safety Instructions Declaration Conformity Table of Contents 386Intro Introduction DefiningIntroduction Service Contact Info WarrantyInstallation Recommendations Getting IEC Power Cord Receptacle Getting Started Rear Panel ConnectionsGetting Started Front Panel ControlsMeter Select Switch Front Panel Type IV conversion system controlsAnalog Analog Applications Basic Analog ConnectionConnection to a Mixing Console Direct Connection to a Recorder Page Digital Digital Applications Digital Output Front Functions Digital Output Rear Panel ConnectionsDigital Applications Sync Input Sample Rate SelectionDirect Connection to a DAW CPU Rear Panel ConnectionsSection Direct Connection to a Digital MixerDigital Applications A/D Conversion Multi-Tracking to Digital Digital Applications Analog and Digital Output Application Appendix Sync Input Info Fig. A.1Block Diagram BlockBy Roger Johnson Type IV White PaperAppendix C Appendix C Appendix C Appendix C Appendix TruncationAppendix D Harman International Company