Using the Channel List
BAND SELECT/TUNING MODE
Follow the steps below to tune in and listen to the channels found by the unit.
1Select DAB by pressing the BAND button.
2Turn the SELECT/TUNING MODE knob to the left or right to scroll through the channels in the channel list.
The present channel is displayed on the first line and the changing list is displayed on the second line.
3When you have found a channel that you want to listen to, press the SELECT/TUNING MODE knob once.
The channel is tuned in and channel information is displayed.
<To display the signal strength of a channel, press the SELECT/TUNING MODE knob again. The signal strength is display. Press the SELECT/TUNING MODE knob once again to cancel the signal strength display.
<Channels are displayed in alphanumeric order in the channel list, with numbers coming first. So, stations such as 6 Music from the BBC will be listed early in the list.
<If a channel is no longer broadcasting or the unit is moved out of the area of a broadcast channel, the unit will no longer be able to tune in the channel. If the channel cannot be tuned in a question mark (?) is displayed in front of the channel name. If you select this channel to tune in by pressing the SELECT/ TUNING MODE knob, “No stations Available” is displayed.
<You can remove a channel that is no longer available from the channel list. See Tidy station, page 12.
v
11