Teac T-H300DAB owner manual DAB Indoor Antenna, DAB Outdoor Antenna, Dipole, Multi-element antenna

Page 7

EDAB Indoor Antenna

Connect the T-type DAB antenna to the DAB socket, extend the lead vertically and attach it to a window frame or wall with thumbtacks, or the like, where reception is best.

<You can check the antenna adjustment or positioning for the best reception by viewing the signal strength on the display.

The signal strength is displayed as a bar graph by pressing the SELECT/TUNING MODE knob once.

FDAB Outdoor Antenna

In an area where DAB signals are weak, it will be necessary to use an outdoor DAB antenna. There are two main types available.

Dipole:

For use in marginal signal areas. This type of antenna is omnidirectional and should increase the strength of all DAB stations being received.

Multi-element antenna:

Also for use in marginal or poor signal areas. This type of antenna is directional and has high gain. This antenna needs to be pointed at the transmitter you want to listen to.

Multi-element

Dipole

<It is possible to use a TV or FM antenna with your DAB tuner as this is normally mounted externally. This may give a stronger signal than a simple internal antenna, however it would not be tuned specifically for DAB reception.

You would need to change the plug on your TV/FM antenna to an F type, and it may also be necessary to use a signal booster to enhance the signal.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents H300DAB Contents Before Use Remote Control UnitMaintenance Battery InstallationH300DAB ConnectionDigital OUT terminal Power cord ACRemote Control jack Audio OUT jackFM Indoor Antenna Connecting AntennasAM Indoor Loop Antenna AM Outdoor AntennaMulti-element antenna DAB Indoor AntennaDAB Outdoor Antenna DipoleI H G F Names of Each ControlFUNCTION/FM Mode button Power switchStandby indicator SELECT/TUNING Mode knobFollowing screen will display for 2 seconds Setting up your DAB TunerPress the Power switch to turn the unit on About DABBand SELECT/TUNING Mode Using the Channel ListFUNCTION/FM Mode SELECT/TUNING Mode Using Function ControlStation order Preset tune Sig error rate Signal error rateUse this option to select the DAB preset station Maximum Sw version Software versionDRC value There are three values of DRC you can applyManual tune Auto TuningSignal strength indicator is displayed Press the Auto Tuning buttonDLS Changing Display SettingsListening to FM/AM FUNCTION/FM Mode ButtonBand Memory Select Tuning Mode PresettingPreset Manuallly FM/AM/DAB Preset Auto FM/AMRDS Program Type Program ServiceBand Info Select RDS RDS Clock TimeProgramme type stops blinking Turn the SELECT/TUNING Mode knobPTY Search You can search for stations by programme typePTY Programmes Factory ResetTo clear the station list/memory Specifications Sleep TimerGeneral TroubleshootingDAB tuner Teac Corporation
Top Page Image Contents