Using Function Control 1
FUNCTION/FM MODE SELECT/TUNING MODE
In DAB mode, use function control to set system options. There are 6 options in the function control.
Station order Signal error rate Preset tune Software version DRC value Manual tune
Station order
Use station order to set the order in which stations are listed. There are four orders: Favourite, Alphanumeric, Active and Tidy.
1While listening to a DAB broadcast press the FUNCTION/FM MODE button.
2Turn the SELECT/TUNING MODE knob until “Station order” is displayed in the second line of the display.
3Press the SELECT/TUNING MODE knob.
The current option is displayed in the first line of the display.
4Turn the SELECT/TUNING MODE knob until the desired option is displayed in the second line of the display.
5Press the SELECT/TUNING MODE knob.
Fav Station (Favourite station)
As you tune in stations and listen to them the unit will memorize the top ten stations you listen to and list them at the top of the channel list. A Favourite station in the channel list has “ 
” displayed after the station name on the first line of the display.
Alphanumeric
This is the default order. Channels are listed by name with numbers first and then alphabetically by letters in the channel name.
Active station
This option will list active stations at the top of the channel list and channels that are in the list but have no service in your area to be listed last in the channel list.
Tidy station
This option will list active stations and remove any channels that are in the list but have no service in your area from the channel list.
-> preset
This option takes your top ten Favourite channels and assigns them to preset numbers 1 – 10.
This option is only available after “Fav Station” option has been turned on. See above.
12