Using Function Control 2
FUNCTION/FM MODE SELECT/TUNING MODE
Sw version (Software version)
This option shows the version number of the installed software. This is for information only and no adjustment is available.
1While listening to a DAB broadcast press the FUNCTION/FM MODE button.
2Turn the SELECT/TUNING MODE knob until “Sw version” is displayed in the second line of the display.
DRC value
This option sets the Dynamic Range Control (DRC) value to be applied to received broadcasts. DRC is used to reduce the range between high and low volumes of audio and is sometimes applied at the broadcast source. Pop music may have a high value of DRC applied, appropriate for constantly high listening levels, while classical music broadcasts may have no DRC applied to allow the listener to hear the full dynamic range of the source volume.
There are three values of DRC you can apply.
0: None 1/2 : Medium
1: Maximum
1While listening to a DAB broadcast press the FUNCTION/FM MODE button.
2Turn the SELECT/TUNING MODE knob until “DRC value” is displayed in the second line of the display.
3Press the SELECT/TUNING MODE knob.
4Turn the SELECT/TUNING MODE knob until the desired level of DRC is displayed in the second line of the display.
5Press the SELECT/TUNING MODE knob.
14