Teac T-H300DAB Connecting Antennas, AM Indoor Loop Antenna, AM Outdoor Antenna, FM Indoor Antenna

Connecting Antennas

AAM Indoor Loop Antenna

Ahigh-performance AM loop antenna provided with this unit is sufficient for good reception in most areas.

To stand the loop antenna on a surface, insert the claw into the slot.

Connect the loop antenna’s wires to the AM antenna terminals as shown.

12

Place the antenna on a shelf, for example, or hang it on a window frame, etc., in the direction which gives the best reception, as far away as possible from the entire system, speaker cords and the power cord to prevent unwanted noise.

If there is no room for the AM loop antenna, you may mount it on the wall using screws (not supplied).

A B

BAM Outdoor Antenna

If the AM loop antenna provided does not deliver sufficient reception (because you are too far from the transmitter or in a concrete building, etc.), it may be necessary to use an outdoor AM antenna.

Strip one end of a 5-m or longer, insulated wire and connect it to the terminal as shown.

The antenna wire should be strung outdoors or if indoors, near a window. For better reception, connect the GND terminal to a reliable ground.

Note:

Even when using an outdoor AM antenna, do not disconnect the AM loop antenna.

CFM Indoor Antenna

Connect the lead-type FM antenna to the FM 75Ω socket, extend the lead and attach it to a window frame or wall with thumbtacks, or the like, where reception is best.

DFM Outdoor Antenna

In an area where FM signals are weak, it will be necessary to use an outdoor FM antenna. Generally, a 3-element antenna will be sufficient; if you live in an area where the FM signals are particularly weak, it may be necessary to use one with 5 or more elements.

6