Blaupunkt TCM 169 Recalling stored radio stations, Selecting the seek-tuning sensi- tivity

Radio operation with RDS (Radio Data System)

Recalling stored radio stations

You can recall any stored radio station at the touch of a button.

•Press BND/TS repeatedly until the de- sired waveband appears in the display.

•Press the corresponding selection but- ton briefly.

If you wish to recall a station stored on a two-digit preset (e.g. preset 19) first press 1 and then 9 within the next 2 seconds.

Selecting the seek-tuning sensi- tivity

You can alter the automatic seek-tuning sensitivity.

If “lo” is displayed, the radio will only pick up strong, local stations.

If “lo” is switched off, the radio will also pick up weaker, more distant stations.

To switch the seek tuning sensitivity:

• Press *.

The sensitivity level can be selected sepa- rately for both modes. (Please refer to the section on “Programming with DSC – DX- LEVEL / LO-LEVEL”).

Switching from stereo to mono (FM only)

Every time the radio is switched on, stereo playback will be activated automatically.

The unit will gradually switch to mono if the reception deteriorates beyond a certain point.

RadioDEUTSCH

ENGLISHTelefon

TelephoneRadio

85