KeyCard and SIM card
If you attempt to program a third Key- Card, the KeyCard which was not part of the programming process will auto- matically become invalid.
If 30 SIM cards have been pro- grammed, it will be necessary to delete old access authorizations before new cards can be trained.
Note:
If the Radiophone is disconnected from the battery (during repairs, for examp- le) and then
b)Training new cards after removing the KeyCard or master SIM card
If this function is activated in the DSC learn mode, it is possible to train an- other SIM card each time the KeyCard/ master SIM card is removed. This function is useful if you want to train several cards one after the other (fleet management).
c)Deleting SIM card authorisations
The authorisation for SIM cards can be deleted using the CARD LIST in the
DSC menu. The master SIM card can be deleted with a KeyCard only.
DSC learn mode
With this function you can select whether you want to train additional SIM cards using the DSC menu only or each time after re- moving the KeyCard or the master SIM card as well.
For operating instructions refer to “Program- ming with DSC – LEARN MODE”.
Displaying the radio pass data
Using the KeyCard supplied with your set you can have the radio pass data such as the model name, product number (7 6...) and serial number indicated in the display.
Please refer to the section on “Programming with DSC – READ KEYCARD”.
Optical warning of anti-theft protection
KeyCard tongue flashes
When the vehicle has been parked and the KeyCard or SIM card removed, the KeyCard tongue can be switched to flash to provide additional
For this function to operate properly it is necessary that the positive power supply line
and the permanent +12 V lead are connect- ed as described in the installation instruc- tions.
Be sure that “KEYCARD LED ON” has been selected in the DSC mode.
If necessary, refer to the section on “Pro- gramming with DSC – KEYCARD LED”.
Switching off the flashing light
The flashing light can be switched off by pushing in the KeyCard tongue gently until it locks.
If you would like to deactivate the flashing tongue altogether, select the “KEYCARD LED OFF” item in the DSC menu:
Care of your KeyCard/SIM card
In order to ensure that the card always func- tions correctly, the contacts must be free of any foreign particles. Avoid direct skin con- tact.
Do not subject the cards to direct sunlight. If necessary, clean the card contacts using a cotton swab dipped in rubbing alcohol.
RadioDEUTSCH
ENGLISHTelefon
TelephoneRadio
75
