Blaupunkt TCM 169 operating instructions You can choose among the following oper- ating modes

Models: TCM 169

1 67
Download 67 pages 57.68 Kb
Page 29
Image 29

Programming with DSC Radio, Cassette, Changer (optional)

After OK “CLEAR?” will appear in the dis- play.

Press << / >> to choose between CLEAR? and NAME? (alter).

Press CL to cancel the process, press OK to confirm the process.

If you want to enter/alter names, please re- fer to “Telephone book menu – Add entry”. It is not possible to clear the card inserted in the set.

Note that the master SIM card can be cleared with the KeyCard only.

READ KEYCARD

This menu item will appear only if a Key- Card is inserted.

It is possible to read out the data on a Key- Card.

Using the KeyCard which was included with the delivery, it is possible to display the equipment data such as name, type number (76 ...) and serial number.

If you remove the KeyCard while it is being read, “CHANGE CARD” will appear in the display. It is possible to read the informa- tion on any KeyCards, even those for differ- ent car radios. It is not possible to operate the unit, except to switch it off. As long as a KeyCard for this unit is inserted, you can switch back to radio operation by pressing OK.

LEARN CARD

You can program a second KeyCard or up to 30 SIM cards.

Refer to the information on “KeyCards and SIM cards - Programming the KeyCard/SIM card”.

USER MODE

You can choose among the following oper- ating modes:

RADIO ONLY

PHONE ONLY STANDARD

(all operating modes can be selected).

Any changes will not take effect until you have exited the menu.

LO-LEVEL SENSITIVITY

Sets the search sensitivity for local recep- tion.

LO-LEVEL 1 – high sensitivity LO-LEVEL 3 – normal sensitivit

DX-LEVEL SENSITIVITY

Sets the search sensitivity for distant recep- tion.

DX-LEVEL 1 – high sensitivity DX-LEVEL 3 – normal sensitivity

VOLUME FIX

Allows you to set the volume at which the unit switches on.

Use << / >> to set the desired volume. If “LEVEL +00” is selected, the car radio will switch on at the volume level which was last set before it was switched off.

TA VOLUME

The volume for traffic messages and the beep can be adjusted.

The traffic message will be played at this volume if the volume currently selected is lower. If the selected volume is louder than the TA VOLUME the traffic message will be played somewhat louder.

End DSC programming/save changes:

Press DSC/OK.

RadioDEUTSCH

ENGLISHTelefon

TelephoneRadio

93

Page 29
Image 29
Blaupunkt TCM 169 You can choose among the following oper- ating modes, End DSC programming/save changes