Blaupunkt TCM 169 operating instructions SMS tone, Call meter format

Programming with DSC Telephone –Setup menu

Ringing tone My phone number

AOC parameters (Advice of Charge) DEUTSCH

You can select the ringing tone by pressing

<</ >> to choose from “Standard, Smooth, Rising (ringing tone gets louder with each ring), Off”.

“Off” corresponds to “Ringing tone volume 0”.

SMS tone

If a message has been received by SMS or voice mail, the equipment can be set to emit a beep at a preset beep volume.

Off – beep is emitted after a message has been received

On – beep is switched off.

Here you can enter a maximum of up to three of your own telephone numbers and the telephone number for your mailbox.

The mailbox number is required to be able to call it directly from the call menu.

After you press OK “Number 1” will appear in the display.

Press / to select the position for your own phone number.

Press OK and enter your own phone number and press OK again. The display shows “Number stored”.

Press / to select the next position, etc.

Call meter format

You can select whether the call charges or the call time is displayed during a call.

This function depends on the features the	Radio
SIM card includes.
If AOC is not supported by the card, “Set
charge parameters” will appear as a menu
item in its place.
The charge rates are determined by the	Telefon
network operator.
You can use this menu item to set the charg-
es and a credit balance. As soon as the cred-
it balance has been exhausted, it will not be
possible to use the telephone until the cred-
it balance is replenished by an authorised	ENGLISH
person.
If your network operator does not support
AOC, the time interval will be set to one
minute. The value selected will be used for
making calculations. The credit function is
deactivated.	Radio
If this menu item is selected, you will be re-
quired to enter the “PIN2 code” or the “Ac-
cess code” after pressing OK.
	Telephone

115