Belkin 5232K Connecting to the network, Connecting the CAT5 cables, Connecting the local console

INSTALLATION

Table of Contents sections 1 2

Connecting to the network

Connect the network cable to the LAN port of the Switch. This must be done before powering on the Switch.

Connecting the CAT5 cables

1.Connect one connector to the SIM’s RJ45 port.

2.Connect the other connector to an available server port on the Switch.

3.Follow the steps above for each computer.

Connecting the local console

To operate the system locally, connect a local console to the Switch:

1.Connect the monitor’s cable to the Switch’s console monitor port.

2.Connect the keyboard’s cable to the Switch‘s console keyboard port.

3.Connect the mouse’s connector to the Switch’s console mouse port.

3 4 5 6

Connecting the power supply

1.Using the power cord provided, connect the Switch to a socket outlet with a grounding connection. Only use the power cord supplied with the unit.

2.Power on the Switch. Allow approximately 45 seconds for boot up.

OmniViewIP 5216K/5232K 12