LOCAL ACCESS
Table of Contents sections 123456
DDC – F10 | Saving changes to the settings |
Display Data Channel (DDC) is a VESA standard for communication between a monitor and a video adapter.
From the Settings window, input the DDC information of the monitor connected to the Switch into the memories of all connected SIMs when first installing the system.
To input the DDC information:
Press “F10”. “Please wait” flashes a few times and disappears. The monitor’s DDC information is sent to all SIMs.
Updating the DDC information
To save changes to the settings and return to the Main window, press “Esc”.
Update the DDC information in any of the following circumstances:
•When replacing the monitor connected to the Switch
•When adding a new SIM to the system
•When reconnecting an existing SIM that was temporarily used in a different system
To update the DDC information, repeat the steps as set out above.
OmniViewIP 5216K/5232K | 47 |