Belkin 5232K Unit Display Diagrams, LED and button table, Connector table, Introduction, sections

Introduction

Table of Contents sections 1 2

Unit Display Diagrams

Figure 1 illustrates the front panel of the OmniView IP 5232K Switch.

Figure 1 OmniView IP 5232K Switch – front view

LED and button table

LED	Function
	Solid: Server is connected to and powered on
Port	Fast Blink: When a port is being accessed remotely
	Slow Blink: When a port is being accessed locally
Ready	Solid Green: When unit is available for use
Link	Blinking Green: Unit is connected to the network
Power	Power Indicator

Note: The port LEDs flash in series during boot up and during system upgrades. Allow approximately 45 seconds for boot up.

3			4				5	6
	J<I@8C(				J
					<
					I
					)	CF:8CLJ<I
GFN<I
(''$)+'M8:,'&-'?q		MD(		MD)
	Figure 2 OmniView IP 5232K Switch – rear view
Connector table
Connector						Function
Local Console						Connect a keyboard, video, and mouse to
						operate the Switch locally.
Serial 1						Connect any serial device.
Serial 2						Connect any serial device.
						Connect to 10/100Mb Ethernet. Yellow LED
LAN						illuminates when connected to a LAN. Green
						LED illuminates when a remote session is
						in progress.
Server Ports						Connect to servers via SIMs (Server
						Interface Modules).
VM1						Connect to server on server port 1 via
						USB cable.
VM2						Connect to server on server port 2 via
						USB cable.

OmniViewIP 5216K/5232K 6