Belkin 5232K, 5216K Local Access, Moving the Confirmation label - F1, Tuning - F5, sections

Page 48
LOCAL ACCESS

LOCAL ACCESS

Table of Contents

sections

1

2

Moving the Confirmation label – F1

The confirmation OSD label that appears briefly showing which computer is currently accessed can be positioned anywhere on the screen.

To position the label from the Main window:

1.Navigate to a computer line using the up and down arrow keys.

2.Press “F1”. The selected screen image and confirmation label appear.

3.Use the arrow keys to move the label to the desired position.

4.Press “Esc” to save and exit.

Tuning – F5

Video tuning may be required if the distance between the Switch and the server is between 50 and 100 feet. You can tune the image of any computer screen from the Main window.

To adjust the screen image:

1.Navigate to the computer line you wish to adjust.

2.Press “F5”. The screen image of the selected computer appears together with the Image Tuning label (see Figure 39).

3

4

5

6

Figure 39 Image Tuning label

3.Adjust the image by using the right and left arrow keys.

4.When the image is satisfactory, press “Esc”.

Note! Picture quality is relative to distance. The farther away a remote computer is from the Switch, the lower the image quality, and the more tuning needed. We recommend that you place the higher-resolution computers closer to the Switch.

OmniViewIP 5216K/5232K

45

Image 48
Contents OmniViewIP* 5216K/5232K User ManualTable of Contents sectionsInstallation Introduction4 Remote Access Local. AccessAdditional Information Introduction sectionsKey Features Introduction256-bit encryption System Contents System RequirementsHost Computer Operating-System OS Platforms ServersTerminology OmniView SMB Server Interface ModulesCAT5 Cables Belkin UTP Patch CablesUnit Display Diagrams Connector tableLED and button table ConnectorINSTALLATION Pre-Installation GuidelinesAvoiding general rack-mounting problems Elevated operating ambient temperatureINSTALLATION Rack-mounting the SMB IP KVM SwitchConnecting the System Table of Contents sectionsCAT5 Cables OmniView IP 5216K/5232K Switch PS/2, USB, and Sun Servers Server Interface ModulesThe Server Interface Modules SIMs Connecting a PS/2 SIM Connecting a USB SIMConnecting to the network Connecting the CAT5 cablesConnecting the local console Connecting the power supplySetting the IP Address Changing the network parameters WEB INTERFACE Logging In to the Web InterfaceSSL certificate notes WEB INTERFACE Logging inConnecting to a target server Configuring the SystemNetwork Configuration OmniView IP Central Access Appliance 5000HQ Administration User Settings AdministratorUser View onlyAdding a user Editing a userDeleting a user Blocking a userAdministration Server Name Edit Administration Serial SettingsAdministration Server Access List Security Settings Password PolicyStandard High security policyMaintenance Switch Upgrade Security SSL CertificateMaintenance SIM Upgrade Restore Factory SettingsWarning! Once reset the data cannot be retrieved Back Up and Restore Set Time and DateSaving Changes and Logging Out Remote Access Accessing a Target ServerREmote AcCESS Switching to a different serverChanging the performance settings The ToolbarAdjusting the video settings BandwidthRefresh 3456Manual video adjust For the following controls, choose the appropriate measurementAuto video adjust Keyboard key sequencesTo add a keyboard sequence To add a predefined sequenceTo record a key sequence To edit a key sequenceSynchronizing mouse pointers Aligning the mice pointersWindows 2000, XP, 2003 Server, Vista Note for Windows ServersRed Hat, Fedora, and other Linux distributions Manual settings Advanced - Mouse emulation Adjustments in general Calibrating mice pointersGlobe icon menu features Virtual media SetupMounting a Drive Mounting an ISO file Things to know about operation of the virtual mediaDisconnecting the remote session Full-screen modeThe Targets Page Menu Changing the password Event logDownloading the log Clearing the logLOCAL ACCESS The OSDNavigating the OSD Main window Selecting a computerLOCAL ACCESS Tuning - F5Moving the Confirmation label - F1 The Settings window - F2 Saving changes to the settings DDC - F10Updating the DDC information Technical Specifications Additional informationTarget Server Client ComputerVideo Resolution and Refresh Rates Additional information640x480 720x400Safety Product RegistrationInformation FCC StatementF1DP216G, F1DP232G CE Declaration of ConformityBelkin International, Inc.., Limited 2-Year Product Warranty What this warranty coversWhat will we do to correct problems? Product WarrantyHow state law relates to the warranty Belkin Tech Support