Belkin P74696 manual Using your Rack-Mount Console KVM Switch, AutoScan Mode

Page 24

Using your Rack-Mount Console KVM Switch

Using your Rack-Mount Console KVM Switch

Selecting a Server Using Keyboard Hot Key Commands

To send commands to the Rack-Mount Console KVM Switch, the “Scroll Lock” (SL) key must be pressed twice within about half a second (you will hear a beep for confirmation). Next, input the key sequence for the specific command (you will have approximately three seconds after the beep to complete each hot key sequence). The hot key commands are listed below:

SL > SL > Up Arrow = Switches to PREVIOUS server in the OSD list box SL > SL > Down Arrow = Switches to NEXT server in the OSD list box SL > SL > XX YY = Directly switches to BANK XX, PORT YY

(XX=00 to 15) (YY=01 to 08 for F1DE108C and F1DE208C)1 SL > SL > Space bar = Activates On-Screen Display

SL > SL > A = Toggles AutoScan Mode on and off

NOTE: Other keys can be used to enter commands for keyboards without “Scroll Lock” keys. For example, “CTRL” is the preferred method for Macintosh® servers, which often map other functions to the “Scroll Lock” key. These settings can be changed in the “Options” page of the OSD.

For hot keys (e.g. up and down arrows) and AutoScan, the order of progression from one server to the next is dictated by the order of the servers in the list box, in the “Main View” of the OSD.

AutoScan Mode

•The AutoScan feature allows you to set your Rack-Mount Console KVM Switch to scan and monitor the activities of all connected servers one by one. The time interval allotted for each server can be defined or adjusted through the OSD menu.

•AutoScan Mode will continue indefinitely until terminated by pressing any valid hot key sequence.

•When the Rack-Mount Console KVM Switch is in AutoScan Mode, it is also in View-Only Mode. This means that input from the console (keyboard, mouse, and monitor) will not be transmitted to the server in focus. Cancel AutoScan to regain control of the server.

•The AutoScan rate is user-configurable, by server, in the “Setup” page of the OSD.

•AutoScan skips any servers that the user has been restricted from viewing. (The restrictions are set on the “Security” page in the OSD.)

1(YY = 01 to 16 F1DE116C and F1DE216C)

1

2

3

4

5

6

7

section

21

Page 23 Page 25
Image 24
Page 23 Page 25
Contents 1U Rack-Mount Console with Built-In 8-Port KVM Switch OmniView EnterpriseRack-mount console Table of Contents Package Contents Feature Overview AutoUpdateQuad-Bus Technology Video Resolution Hot KeysReprogrammable Hot Key Initiator Sequence AutoScanEquipment Requirements CablesOperating System Requirements Unit Display Diagrams Front ViewLCD Display Buttons Specifications Pre-Configuration Cable Length RecommendationsStep Section Unlock your Rack-Mount Console KVM Switch with keys provided PS/2 Connection USB Connection Section Connecting Multiple KVM Devices Daisy-Chaining DIP Switch Configuration Chart InstallationBefore you begin Connecting the Daisy-Chain Cable Example of Daisy-Chain ConfigurationAdding additional units Connecting the servers Powering up the Systems Using your Rack-Mount Console KVM Switch Selecting a Server Using Keyboard Hot Key CommandsAutoScan Mode Using the MultiView Feature Input and Navigation Features Main Group ColumnComputer Name Column ID ColumnSetup Button Mouse ColumnSecurity Column Console ColumnSetup Admin Scan ColumnScan Time and Change All Button SecurityUser GuestUser Columns 1, 2, 3, G Passwords Password Entry FieldsEnable Check Boxes AutoLogout Enable and Time Broadcast PasswordsOptions Display Banner Display Inactive PortsDisplay Restricted Ports Alternate Attention KeyDisable Viewing Daisy-Chain this KVM SwitchAdvanced Dialog Unit ID Assign Bank AddressRestore Factory Defaults Error Messages and DialogsLogin Dialog Steal Control of this HostBanner Splash ScreenAutoUpdate Firmware Update Utility Installing the AutoUpdate applicationUpdating Firmware Connecting the server to the Rack-Mount Console KVM Switch Updating Devices via the Web Using your Rack-Mount Console KVM Switch Section Using your Rack-Mount Console KVM Switch Completing the Firmware Update Using your Rack-Mount Console KVM Switch Section Glossary Section FCC Statement CE Declaration of Conformity
Top Page Image Contents