Belkin P74696 manual Section

Page 18

Installation		Connecting Servers to the Rack-Mount Console KVM Switch
Installation		Connecting Servers to the Rack-Mount Console KVM Switch
		(USB Connection)

Step 4

Your server will detect the Rack-Mount Console KVM Switch as a generic mouse and keyboard. Older versions of Windows do not automatically install USB HID devices, so you will have to manually press “Next” through the Windows Add/Remove Hardware Wizard until the HID devices are all installed (the Rack-Mount Console KVM Switch will install four devices: an HID keyboard, an HID mouse, a generic keyboard, and a generic mouse). This driver installation is only required the first time the Rack-Mount Console KVM Switch enumerates on each server; the Rack-Mount Console KVM Switch will be detected and enumerate automatically in the future. When driver installation is complete, power down the server and disconnect the keyboard, mouse, and monitor.

Step 5

Connect the male VGA HDDB15 connector on the Micro-Cabling to the VGA port on the server.

Step 6

Repeat Steps 1 through 5 for each additional server you wish to connect to the Rack-Mount Console KVM Switch via USB.

NOTE: For USB Installation

We recommend you attach the Micro-Cabling directly to a free USB port on your server, not through a hub.

1

2

3

4

5

6

7

section

15

Image 18

Contents 1U Rack-Mount Console with Built-In 8-Port KVM Switch OmniView EnterpriseRack-mount console Table of Contents Package Contents Feature Overview AutoUpdateQuad-Bus Technology Reprogrammable Hot Key Initiator Sequence Video ResolutionHot Keys AutoScanEquipment Requirements CablesOperating System Requirements Unit Display Diagrams Front ViewLCD Display Buttons Specifications Pre-Configuration Cable Length RecommendationsStep Section Unlock your Rack-Mount Console KVM Switch with keys provided PS/2 Connection USB Connection Section Connecting Multiple KVM Devices Daisy-Chaining DIP Switch Configuration Chart InstallationBefore you begin Connecting the Daisy-Chain Cable Example of Daisy-Chain ConfigurationAdding additional units Connecting the servers Powering up the Systems Using your Rack-Mount Console KVM Switch Selecting a Server Using Keyboard Hot Key CommandsAutoScan Mode Using the MultiView Feature Input and Navigation Features Computer Name Column MainGroup Column ID ColumnSecurity Column Setup ButtonMouse Column Console ColumnSetup Scan Time and Change All Button AdminScan Column SecurityUser GuestUser Columns 1, 2, 3, G Passwords Password Entry FieldsEnable Check Boxes AutoLogout Enable and Time Broadcast PasswordsOptions Display Restricted Ports Display BannerDisplay Inactive Ports Alternate Attention KeyAdvanced Dialog Disable ViewingDaisy-Chain this KVM Switch Unit ID Assign Bank AddressLogin Dialog Restore Factory DefaultsError Messages and Dialogs Steal Control of this HostBanner Splash ScreenAutoUpdate Firmware Update Utility Installing the AutoUpdate applicationUpdating Firmware Connecting the server to the Rack-Mount Console KVM Switch Updating Devices via the Web Using your Rack-Mount Console KVM Switch Section Using your Rack-Mount Console KVM Switch Completing the Firmware Update Using your Rack-Mount Console KVM Switch Section Glossary Section FCC Statement CE Declaration of Conformity