Using your Rack-Mount Console KVM Switch
Advanced Dialog Page
Activating this button will take the user to the “Advanced Dialog” screen.
Disable Viewing
When “Disable Viewing” is checked, only another administrator may view channels occupied by the administrator. This function will be active by default in the OSD by design. For security reasons, the Admin needs to disable this if need be.
Daisy-Chain this KVM Switch
Checking this box allows a Rack-Mount Console KVM Switch set to BANK 00 to communicate with other BANKs in a daisy-chain configuration. This affects front-panel operations, and other operational parameters. Whenever the state of this check box is changed, the following message will be displayed: “This will reset the KVM to change this setting”. If the user selects “OK”, the Rack-Mount Console KVM Switch will immediately reboot in the new configuration. By default, a Rack-Mount Console KVM Switch set to BANK 00 is configured as standalone (the check box is cleared).
Unit ID (Assign BANK Address)
Checking one of these boxes (0, 1, 2, or 3) assigns a BANK address for the Rack-Mount Console KVM Switch. Selecting “0” sets the BANK address to 00, selecting “1” sets the BANK address to 01, and so on. The default BANK address for the Rack-Mount Console KVM Switch is set at 00 (box “0” is checked).