Belkin P74696 manual Scan Column, Scan Time and Change All Button, Security, Admin

Using your Rack-Mount Console KVM Switch

Scan Column

The “Scan” column displays the current setting for how long the console views each server during AutoScan. To change the viewing duration for a server, click in the desired cell.

Scan Time and “Change All” Button

The user can reset the scan time for all servers by entering a value from 1–99 in the edit box and clicking on the “Change All” button. The user will be asked to confirm the action before the new time is applied.

Console Column

The console currently viewing the server is indicated in this column.

Security Page

The “Security” page allows the administrator to assign user-access permissions for each connected server. There are three levels of user access: Admin, User, and Guest.

NOTE: “Admin”, “Guest”, and “User” refer to an individual logged in as “Guest” or “User” and operating at that specific access level.

Admin

The Admin is the only user that can access the “Setup” pages to configure the Rack-Mount Console KVM Switch (or other daisy-chained KVM device). The Admin can switch between all connected servers and restrict Users and Guests from accessing specific servers. The Admin can assign access for one Guest account and up to three User accounts.

1

2

3

4

5

6

7

section

27