Appendix (continued)
Hewlett-Packard
Steps for HP Pavillion PC Models
1.At the HP Blue Screen, press F1 to enter Setup.
2.Select Advanced from the menu bar.
3.Following the legend directions, select Peripheral Configuration and then use the
4.Select the mode with the highest performance (e.g. ECP).
5.Follow the legend directions to save the setting and exit Setup.
Steps for HP Vectra PC Series
1.While the computer is booting, follow the directions on the screen: Press F2 to Enter Setup. This is displayed at the bottom of the Hewlett Packard System Hardware Test screen.
2.Use the arrow keys to highlight Parallel Port Mode.
3.Follow the legend directions on how to change the options.
4.Set the port mode with the highest performance (e.g. ECP).
5.Follow the legend directions to save the setting and exit Setup.
Steps for HP Vectra 500 PC Series
1.While the computer is booting, follow the directions on the screen: Press F2 to Enter Setup. This is displayed at the bottom of the Hewlett Packard System Hardware Test screen.
2.Use the arrow keys to highlight Parallel Port Mode.
3.Follow the legend directions on how to change the options.
4.Set the port mode with the highest performance (e.g. ECP).
5.Follow the legend directions to save the setting and exit Setup.
Steps for HP OmniBook 5000 and 5500 PCs
1.While the computer is booting, follow the directions on the screen: Press F2 to Enter Setup. This is displayed at the bottom of the Hewlett Packard System Hardware Test screen.
2.Use the arrow keys to highlight Parallel Port Mode.
3.Follow the legend directions on how to change the options while selecting the parallel port mode with the highest performance (e.g. ECP).
4.Follow the legend directions to save the setting and exit Setup.
5.Add the Ecpon.com program to the computer's Autoexec.bat file. You can find this file on the compact disc or on Disk 1 of the disk set.
IBM Aptiva
General Steps
1.While the computer is booting, follow the directions on the screen: Press F1 to enter Setup.
2.Follow the legend on how to scroll through the Setup options until you reach Input/Output Ports.
3.Choose the mode with the highest performance (e.g. ECP).
4.Follow the legend directions to save and exit Setup.
30