F2N036-XX

6. Connect the first computer's keyboard cable to the OmniCube™. Using another PS/2 cable (Belkin Part# F2N036-XX), connect one end to the PS/2 keyboard port on the computer, and the other end to the PC1 keyboard port on the back of the OmniCube™. If your computer has an AT-style keyboard port, you will need a PS/2-AT keyboard adapter (Belkin Part# F2N018).

MONITOR VGA

VGA

PC4	PC3	PC2	PC1
+
DC 9V 500mA			VGA MONITOR
RESET
			RJ45 NETWORK

7. Double check all the connections. Make sure the keyboard and mouse cables go to the correct ports.

8. Repeat steps 4-6 for the second, third and fourth computers.

9. Attach the power supply to the power supply connector at the back of the OmniCube™. Plug this into any available AC outlet. You should see an LED on the front panel blink, and hear a beep. Power up your monitor.

10.You can now power up both computers simultaneously. The first computer will show up on the monitor. Check to see if the keyboard and mouse works, as well as the image displayed on the screen. If this is okay, press the SELECT button and check the functionality of the second computer. If you find any errors, double check all the cable connections.