9
8. Complete any other exterior ue piping necessary,
using 4" pellet venting.
9. Back inside, place the 2 halves of the interior wall
trim plate over ue pipe. Using the black pop rivets,
fasten together, then slide it against the wall and fasten
it to the wall.
10. Replace the side door / rear cover assembly with 6
black screws.
11. Complete the unit assembly and test.
Installation
CAuTION:
ThE STruCTurAl INTEgrITY OF ThE
mObIlE hOmE FlOOr, wAll, ANd
CEIlINg/rOOF muST bE mAINTAINEd.
wArNINg:dO NOT INSTAll IN mObIlE hOmE SlEEPINg rOOmWall Trim Plate
Wall Trim Plate
Gasket
Wall
Termiation
Standard Wall Termination
g. 9
Open
g. 8