Belkin F1DS102P user manual Troubleshooting, Am getting a black screen on my monitor

Page 18

P73778-C-SOHO-man-9_02.qxd 9/18/02 5:17 PM Page 32

TROUBLESHOOTING

VIDEO

I am getting ghosting, shadowing, or fuzzy images on my monitor.

•Check that all video cables are inserted properly.

•Check that the monitor you are using supports the resolution and refresh-rate setting on your computer.

•Check that the graphics card you are using supports the resolution and refresh-rate setting on your computer.

•Connect the monitor directly into the computer you are having trouble with to see if the problem still appears.

I am getting a black screen on my monitor.

•Check that all video cables are inserted properly.

•If you are not using a power adapter, check that the keyboard cable is connected and inserted properly between the computer and KVM Switch for the appropriate port.

•If you are using the KVM Switch for video switching only and have no keyboard and mouse connection between the KVM Switch and PC, you will need to purchase the optional 9V DC, 600mA power adapter (F1D065-PWR for your appropriate country).

•Connect your monitor directly to the computer to verify that your monitor is functioning properly.

TROUBLESHOOTING

KEYBOARD

Computer does not detect keyboard and I get a keyboard error reported at boot up.

•Check that the keyboard cable between the KVM Switch and the computer is connected properly. Tighten any loose connections.

•Try swapping your keyboard with a different one.

•Try connecting the computer to a different port.

•If you are using the keyboard software that was included with your keyboard, uninstall it and install the standard Microsoft keyboard driver.

MOUSE

Mouse is lost when I switch to a different channel.

•Check that the mouse you are using is connected properly to the console of the KVM Switch.

•If you are using a mouse driver that was included with your mouse, uninstall it and install the standard Microsoft mouse driver.

•Disconnect and reconnect the mouse cable attached to the channel with which you are experiencing problems to re-synchronize the mouse connection.

•Attach the mouse directly to the computer you are experiencing mouse problems with.

•If the computer just awoke from standby mode, allow up to one minute to regain mouse function.

•Deactivate power-management schemes on the PC that you are experiencing problems with.

•Try swapping the mouse with a different one.

32

33

Page 17 Page 19
Image 18
Page 17 Page 19
Contents OmniView Table of Contents IntroductionFeature Overview OverviewEquipment Requirements Operating SystemsCables Unit Display Diagrams Front ViewBack View Pre-Configuration Overview InstallationSpecifications Where to Place the KVM SwitchInstalling the KVM Switch Base Single-Switch InstallationPS/2 Installation Keyboard, Video, and Mouse Connections Important NoteConnect the Computer Audio and Microphone Connections Connect the AudioUSB Installation Keyboard, Monitor, and Mouse ConnectionsConnect the Console Connect the Computer Selecting a Computer Using Direct-Access Port Selectors Using Your KVM SwitchPowering Up the Systems Selecting a Computer Using Keyboard Hot Key CommandsOmniView KVM Switches OmniView E Series Belkin KVM Switches and AccessoriesAutoScan Mode OmniView Soho Series with AudioOmniView KVM Cables OmniView PRO2 Series with On-Screen DisplayOmniView MATRIX2 Series with Dual-Console Control OmniView E Series KVM CablesOmniView Gold Series All-In-One KVM Cables OmniView PRO Series Plus All-In-One KVM CablesOmniView Matrix Series All-In-One KVM Cables OmniView Daisy-Chain CablesFAQs OmniView KVM Accessories and AdaptersOr keyboard Troubleshooting Am getting a black screen on my monitorComputer boots up fine, but the mouse does not work USB F1DS102T, F1DS104T onlyFCC Statement WARRANTY, FCC, CE, Ices StatementBelkin Corporation Limited Five-Year Product Warranty CE Declaration of Conformity
Top Page Image Contents