P73778-C-SOHO-man-9_02.qxd 9/18/02 5:17 PM Page 14
INSTALLATION
Audio and Microphone Connections
Recommended Belkin OmniView KVM Cables for SOHO Series with Audio are included with Belkin part number
Note: Speakers and microphones are not required for use of your KVM Switch.
Connect the Audio
1.Using the audio cable attached to your speakers, connect the male 3.5mm plug to the lime audio jack in the “Console” section of the KVM Switch. See Fig. 8.
Fig. 8
INSTALLATION
2.Using the mic cable attached to your microphone, connect the male 3.5mm plug to the pink mic jack in the “Console” section of the KVM Switch. See Fig. 8.
3.Using the OmniView KVM Cable for SOHO Series with Audio (the KVM Cable), connect one end of the lime male 3.5mm plug to the speaker jack of your sound card or computer and connect the other end to the audio jack of the KVM Switch. See Fig. 9.
4.Using the KVM Cable, connect one end of the pink male 3.5mm plug to the mic jack of your sound card or computer and connect the other end to the pink mic jack of the KVM Switch. See Fig. 9.
Fig. 9
14 | 15 |