Philips P88 manual Personal Setting, To exit without storing the setting, press ‚

Page 15

Personal Setting

You can adjust the personal setting to your desired level with the JOG control.

1Press and hold PERSONAL for about 5 seconds to switch on the personal setting mode.

ª"SELECT PRESET NUMBER" will be displayed.

2Adjust the JOG to select the desired

preset number for personal setting and press ‡to confirm the selection.

ª"ADAPT LOW FREQ LEVEL" will be displayed.

3Adjust the JOG to select the desired Spectrum Analyzer band level for low frequency.

ªThe level will increase or decrease between+3 and -3.

4Press ‡to confirm the selection.

ª"ADAPT MID FREQ LEVEL" will be displayed and the next followed by "ADAPT HIGH FREQ

LEVEL".

•Repeat step 3 - 4 to select the desired

mid and high frequencies Spectrum Analyzer band levels.

5You can choose to edit the name for the personal setting.

ªThe first character of setting name will be flashing.

6Adjust the JOG to select the desired alphabet, number or symbol.

ª"A to Z", "0 to 9" or "*, -, +, \, /, _".

7Press ‡to confirm the selection.

ªThe next character for editing will be flashing.

• Repeat step 6 - 7 to store up to 10 characters.

8To store the setting, press PERSONAL again.

•Before storing the setting, you can press ˆto retrace the steps in the reverse order.

•To exit without storing the setting, press ‚.

Notes:

–During personal setting, if no button is pressed within 90 seconds, the system will exit personal setting mode automatically.

–wOOx level cannot be stored as part of the personal setting.

–It is not possible to adjust Bass/Treble level during personal setting, "USE JOG" will be displayed.

DIGITAL SOUND CONTROL (DSC)

The DSC feature enables you to adjust the system to suit your type of music.

1Press to select the DSC feature.

2Adjust the JOG to select the desired Digital Sound Control setting :

OPTIMAL, CLASSIC, TECHNO, VOCAL, ROCK or JAZZ.

ªThe selected digital sound is encircled.

ª"OPTIMAL, CLASSIC, TECHNO, VOCAL, ROCK or JAZZ" will be displayed.

Note:

– For neutral setting, select CLASSIC.

VIRTUAL ENVIRONMENT CONTROL (VEC)

The VEC feature enables you to adjust the system to select a type of environment.

1Press to select the VEC feature.

2Adjust the JOG to select the desired Virtual Environment Control setting :

HALL, CLUB, DISCO, CINEMA, CONCERT or ARCADE.

ªThe selected environment is encircled.

ª"HALL, CLUB, DISCO, CINEMA, CONCERT or ARCADE" will be displayed.

OPERATING THE SYSTEM

BASS/TREBLE

The BASS/TREBLE features enable you to define the sound processor settings for Bass and Treble.

1Press to select the BASS/TREBLE feature.

ªThe BASS and TREBLE LED will be lit.

ª"ADAPT BASS AND TREBLE LEVELS" will be displayed.

2Use BASS/TREBLE CONTROL to select the desired BASS or TREBLE level respectively.

ªThe BASS/TREBLE level will increase

or decrease between level +3 and -3.

•Press BASS 3 or 4 to select the low tone level.

ª"BASS -X or BASS +X" will be displayed.

•Press TREBLE 3 or 4 to select the high tone level.

ª"TREBLE -X or TREBLE +X" will be displayed.

Note:

– "X" denotes the sound level.

English

15

pg 01-31/P88/22-Eng

15

3/6/00, 1:26 PM

3139 116 19721

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 3139 116 Mini Hi-Fi SystemCopyright in the U.K How to connect a plugImportant notes for users in the U.K Mains plugDansk English Français Español Deutsch NederlandsItaliano SvenskaContents Environmental Information Accessories SuppliedSafety Information General InformationSpeakers Connection FM Wire Antenna ConnectionPreparation AM Loop Antenna ConnectionInserting batteries into the Remote Control Connecting other Equipment to your systemWireless Surround Out Connection AC Power SupplyTest Tone Setting up the Dolby Pro Logic systemDolby PRO Logic Dolby Pro LogicNormal Stereo Dolby SurroundDolby 3 Stereo Dolby Center PhantomDisc ControlsControls on the system and remote control ’, ‘, etc Mode Demonstration modeTo stop the demonstration mode Easy SetDim mode Switching the system onSwitching the system to standby mode Volume ControlDenotes the sound level Personal SettingTo exit without storing the setting, press ‚ WOOx level cannot be stored as part of the personal settingAutomatic DSC-wOOx / VEC-wOOx selection There are three wOOx settings to enhance the bass responseWhen normal wOOx sound effect is selected WOOxCD Direct Play CD TextLoading the CD Changer Discs for playbackProgramming Tracks Playing a CDDisc Change Selecting a desired trackReviewing the program Playing the programErasing the program when Tuner Tuning to radio stationsStoring Preset Stations Tuning to Preset Radio StationsNEWS/TA Traffic Announcement Receiving RDS Radio StationOnly available in Radio Station with RDS During News bulletin or Traffic There are two Auxiliary modes Normal AUX modeTuner AUX/CDR Selecting External EquipmentAuto Reverse Playback only on TapeLoading a tape Tape Playback3afor playback on tape deck 2 only When playback is stoppedRewind/Fast Forward Dolby B Noise Reduction SystemRecording from other sources RecordingDigital Recording via Digital Out Only Œ mode is available during dubbingCD Synchro Start Recording One Touch RecordingView Clock Timer SettingClock Setting ClockTo switch off the Sleep Timer TimerSleep Timer To switch off the TimerSubject to modification SpecificationsRadio Reception Maintenance TroubleshootingMaintenance CD Player OperationGeneral Tape Deck Operation
Top Page Image Contents