Philips P88 manual Timer Setting, View Clock, Clock Setting

CLOCK TIMER

MINI HIFI SYSTEM

STANDBY

ON

POWER SAVE

IR SENSOR

CD 1•2•3 BAND TAPE 1•2 CDR/DVD

LEFT CENTER RIGHT

SURR SURR

PRO LOGIC

DOLBY B NR

NEWS/TA

RDS

CD TEXT

5Press CLOCK/TIMER again to store the setting.

ª The clock starts.

•To exit without storing the setting, press ‚on the system.

Notes:

Timer Setting

•	The system can switch on to CD,
	TUNER, or TAPE 2 mode automatically
	at a preset time. It can serve as an
	alarm to wake you up.
•	Before setting the timer, make sure the

English

C1CD• 2 • 3

BANDTUNER

TAPE

AUXCDR

EC

BASS

▲

PRESET ▲

OLUM

E

V

/TR

SEARCH•TUNING

STOP•CLEAR

PLAY PAUSE

PREV

SIDE NEXT

EB

C

LE

D

S

L

O

N

A

PROG

CLOCK/

DUB

DIM

A. REV

RECORD

RS

TIMER

(HSD)

E

P

BASS

TREBLE

PLUS

wOOx

LEVEL

TECHNOLOGY

–During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically.

–When a power interruption occurs, the clock setting is erased.

–To set the time with RDS clock, see "Receiving RDS Radio Station" under TUNER section.

	clock is set correctly.
•	The timer will always be switched on
	once it is set.
•	The volume of the timer will
	increase from the minimum level
	until the volume level before the set
	is switched to standby mode.

1 Press and hold CLOCK/TIMER for more

View Clock

You can view the clock (if it is set) if the system is in Standby mode or when any sound source is selected (CD, TUNER, etc.). The clock will be displayed for about 7 seconds.

•Press CLOCK/TIMER briefly (or CLOCK on the remote control).

ª"PM 10:38 or 22:38" (the current time) will be displayed depending on whether you have selected 12- or 24-hour mode.

ª"--:--" will be displayed if the clock is not set.

Note:

–When the system goes into low power standby mode, the clock setting will not be displayed.

Clock Setting

The clock can be set in either 12- or 24- hour mode, e.g. "AM 12:00" or "00:00". Before setting the clock, you must be in the View Clock mode.

1Press CLOCK/TIMER to select clock mode.

2Press PROG (on the system only) to select 12- and 24- hour mode.

ªIf 12-hour mode is selected, "AM 12:00" starts flashing.

ªIf 24-hour mode is selected, "00:00" starts flashing.

3Set the hour withʈor ‡ on the system.

4Set the minute withÊ’or ‘ on the system.

than 2 seconds to select timer mode.

ª “AM 12:00” or “00:00" or the

last timer setting starts flashing

depending on whether you have

selected 12- or 24-hour mode.

ª The TIMER starts flashing.

ª The selected source is lit while other

available sources are flashing.

2 Press CD, TUNER or TAPE to select the

desired source.

• Before selecting CD or TAPE, make sure a CD or tape is loaded in the CD tray or tape deck 2.

3Pressʈor ‡ on the system to set the hour for the timer to start.

4PressÊ’or ‘ on the system to set the minute for the timer to start.

27

pg 01-31/P88/22-Eng 27 3/6/00, 1:28 PM 3139 116 19721