Belkin PM01110EA user manual Alternate Setup Method, Connect your Router

Alternate Setup Method

Table of Contents sections 1 2 3 4 5 6 7 8 9 10

The Web-Based Advanced User Interface is a web-based tool that you can use to set up the Router if you don’t want to use the Setup Assistant software. You can also use it to manage advanced functions of the Router. From the Web-Based Advanced User Interface, you can perform the following tasks:

•View the Router’s current settings and status

•Configure the Router to connect to your ISP with the settings that they provided you

•Change the current network settings such as the Internal IP address, the IP address pool, DHCP settings, and more

•Set the Router’s firewall to work with specific applications (port forwarding)

•Set up security features such as client restrictions, MAC address filtering, WEP, and WPA

•Enable the DMZ feature for a single computer on your network

•Change the Router’s internal password

•Enable/Disable UPnP (Universal Plug-and-Play)

•Reset the Router

•Back up your configuration settings

•Reset the Router’s default settings

•Update the Router’s firmware

Step 1 Connect your Router

1.1Turn off the power to your modem by unplugging the power supply from the modem.

1.2Locate the network cable that is connected between your modem and your computer and unplug it from your computer, leaving the other end connected to your modem.

1.3Plug the loose end of the cable you just unplugged into the port on the back of the Router labeled “Modem”.

1.4Connect a new network cable (not included) from the back of the computer to one of the wired computer ports labeled “1–4”. Note: It does not matter which numbered port you choose.

1.5Turn your cable or DSL modem on by reconnecting the power supply to the modem.

G Wireless Router 26