Belkin PM01110EA user manual Alternate Setup Method

Alternate Setup Method

Table of Contents sections 1 2 3 4 5 6 7 8 9 10

WAN

			1.6b
1.1	LAN	1.2	1.4
1.5			1.3
1.6a

Note: Your Router may have ports in different locations than depicted in the illustration above.

1.6Before plugging the power cord into the Router, plug the cord into the wall, then plug the cord into the Router’s power jack.

1.7Verify that your modem is connected to the Router by checking the lights on the front of the Router. The green light labeled “Modem” should be ON if your modem is connected correctly to the Router. If it is not, recheck your connections.

1.8Verify that your computer is connected properly to the Router by checking the lights labeled “1–4”. The light that corresponds to the numbered port connected to your computer should be ON if your computer is connected properly. If it is not, recheck your connections.

G Wireless Router 27