Belkin PM01110-A user manual Setting WPA/WPA2 Guest Access Optional

Using the Web-Based Advanced User Interface

Table of Contents	sections	1	2	3	4	5	6	7	8	9	10
Setting WPA/WPA2						Guest Access (Optional)

1.Select “WPA/WPA2” from the “Allowed Client Type” drop-down box.

2.Select “Password(PSK)” from the “Authentication” drop-down box. Then, select “Passphrase(8~63 characters)” from the “Password(PSK) type” drop-down box.

3.Enter your pre-shared key. This can be from eight to 63 characters and can be letters, numbers, or symbols. This same key must

be used on all of the clients that you set up. This pre-shared key will allow users full access to your network including shared files and printers.

4.Click “Apply Changes” to finish. You must now set all clients to match these settings.

The guest pre-shared key allows guest users Internet-only access to restrict them from entering your network and having access to files on your PCs. Enter your pre-shared key for guest access. This can be from eight to 63 characters and can be letters, numbers, or symbols. Click “Apply Changes” to finish.

G Wireless Router 56