3M 11-81375-227 manual Connecting the M1500SS Cables to your Computer

Page 19

3M™ MicroTouch™ Display M1500SS User Guide

19

CAUTION

To avoid the risk of electric shock which may result in minor or moderate injury:

￿The socket-outlet should be installed near the equipment and should be easily accessible.

￿Use a power cable that is properly grounded. Always use the appropriate AC cord certified for the individual country. Some examples are listed below:

USA UL Switzerland SEV

Canada

CSA

Britain

BASE/BS

Germany

VDE

Japan

Electric Appliance Control Act

5.Connect the power cable to the AC/DC supply. Connect the other end to the appropriate AC outlet.

Figure 10 Connecting the M1500SS Cables to your Computer

You should be sure all cable connections are secure -- tighten all cable screws. Shaking and vibration may dislodge cables that are improperly connected.

Route all wiring and cabling away from heat sources and sharp metal edges to avoid damage. Also, keep the touch sensor cable away from sources of electromagnetic and radio frequency interference.

WARNING

To avoid the risk of electric shock which could result in serious injury or death:

•Do not use a damaged power supply.

•Do not use a power cord that is frayed or otherwise damaged.

3M Touch Systems, Inc. Proprietary Information

Document #19-258

Rev AH

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Page 3M MicroTouch Display M1500SS User Guide Contents Chapter Maintenance and Troubleshooting Intended Use Important Safety InformationExplanation of Signal Word Consequences OverviewHJC HASU05F Important Notes Service and Repair IndicatorsContact 3M Touch Systems 3M Touch Systems Support ServicesOverview Introduction to Flat Panel DisplaysOptions for Using Other Video Resolutions Native Video Resolution on a Flat Panel DisplaySystem Requirements Setting Up Your M1500SS DisplayArm Mounting Option Unpacking Your Touch DisplayDisassembling the Yoke & Base for Arm Mounting Countertop Base Mounting OptionAdjusting the Viewing Angle Access to the Video ControlsSupported Video Display Modes and Refresh Rates Installing the Video Card and Video DriverConfiguring the Display Settings Applicable Display Mode and Refresh RateSupported MagStripe Readers Multimedia FeaturesUsing the Standard Controls for the Video Card Optional Card Reader BracketAll mini sized readers Supported MagStripe Readers ID Tech MagTekIdentifying Your Display Connections Connecting the DisplayConnecting the M1500SS Cables to your Computer Removing the Cable Management Cover Cable Management SystemSliding Cable Management Cover Off Base Testing the M1500SS DisplayInstalling Touch Software Video Display Options Adjusting the M1500SS Video DisplayBrightness Auto ConfigColor ContrastPosition Miscellaneous Menu ImageDo not Release Lock Out FeaturePage Touch Sensor Care and Cleaning Maintenance and TroubleshootingMaintaining Your Touch Display Installation Concerns Problem Possible Causes and Solutions Display Installation ProblemsPower Management Troubleshooting the Touch SensorFCC Warning Regulatory Agency ApprovalsCE Conformity for Europe Page Document #19-258

11-81375-227 specifications

3M 11-81375-227 is a versatile adhesive designed to meet a wide range of industrial and consumer needs. Known for its exceptional bonding capabilities, this adhesive is particularly suited for applications requiring strong adhesion yet easy removability. It is ideal for use in both temporary and permanent bonding situations, making it a popular choice in various industries, including automotive, construction, and electronics.

One of the main features of the 3M 11-81375-227 is its advanced adhesive technology. The product leverages a unique formulation that combines high initial tack with strong ultimate adhesion. This ensures that surfaces adhere quickly upon application, which is critical in time-sensitive assembly processes. Its clear and low-odor properties improve usability, making it comfortable to work with in enclosed environments.

The adhesive can bond a wide variety of substrates, including metals, plastics, glass, and paper, offering versatility across different applications. It also exhibits excellent temperature resistance, allowing it to perform reliably in both hot and cold environments. This characteristic is particularly valuable in industries where temperature fluctuations are common, ensuring that the bond maintains its integrity without degrading.

Additionally, the 3M 11-81375-227 is designed for easy application. The product can be dispensed in various ways, including fine lines or sprays, enabling customization based on the specific needs of the task at hand. This adaptability is enhanced by its quick-drying formula, which significantly reduces set time while allowing users to reposition materials during assembly.

Furthermore, the adhesive is crafted to be environmentally friendly, adhering to stringent regulatory standards. This focus on sustainability is becoming increasingly important in today’s marketplace, as consumers seek products that are not only effective but also environmentally responsible.

In conclusion, the 3M 11-81375-227 is an innovative adhesive that combines performance, versatility, and ease of use. With its strong bonding capabilities, compatibility with various substrates, and user-friendly application methods, it stands out as a reliable solution for professionals and DIY enthusiasts alike. Whether working on intricate projects or large-scale manufacturing, this adhesive delivers the quality and durability necessary to achieve lasting results.
Top Page Image Contents