3M 11-81375-227 manual HJC HASU05F

6 3M™ MicroTouch™ Display M1500SS User Guide

DANGER

To avoid the risk of fire and/or explosion which will result in serious injury or death:

Do not install or use this product in a hazardous location.

WARNING

To avoid the risk of fire which could result in serious injury or death:

Do not remove the cover or back of the display.

To avoid the risk of electric shock which could result in serious injury or death:

•This device must be operated with the original power supply, part numbers

•HJC - HASU05F

•AC Adapter – STD1203

•Li Shin – LSE9901B1250

•CHI -- CH-1234

•Do not use a damaged power supply.

•Do not use a power cord that is frayed or otherwise damaged.

CAUTION

To avoid the risk of electric shock which may result in minor or moderate injury:

•The socket-outlet should be installed near the equipment and should be easily accessible.

•Use a power cable that is properly grounded. Always use the appropriate AC cord certified for the individual country. Some examples are listed below:

USA UL Switzerland SEV Canada CSA

Britain BASE/BS

Germany	VDE
Japan	Electric Appliance Control Act

•Do not service the Display.

o There are no user serviceable parts inside.

o Refer all servicing to qualified service personnel. o The backlight inverter output is at high voltage.

•Do not use non-conforming replacement parts.

•Do not place wet or damp objects on the display.

•Do not expose the display to rain or other sources of water, steam, or moisture.

•Do not place foreign objects on the display or its cables.

•Do not remove the cover or back of the display.

To avoid the risk of glass breakage which may result in minor or moderate injury:

•Handle the display with care to avoid breaking the touch sensor. The display contains glass parts. Dropping the display may cause the glass parts to break.

•Do not place foreign objects on the display.

3M Touch Systems, Inc. Proprietary Information