Star Micronics PT-10Y user manual Printing on fanfold paper

Page 9

Printing on fanfold paper 7

Plug the printer back into its AC power source. The printer will beep to indicate that paper is not loaded properly.

Press the control panel’s PAPER button and the paper will feed to the starting position.

Printing on fanfold paper

When printing on fanfold paper, take care not to print too close to the perforations that separate each sheet. The following shows the recommended print area for fanfold paper.

English

 

5mm

18mm

18mm

Perforation

25.4mm

25.4mm

 

Bottom of

75mm

Form

 

Also note the following important points whenever using fanfold paper and continuous forms.

You can use the same line feed and form feed operations as you use with single-sheet paper.

When using continuous multi-part forms, do not use forms with more than three parts.

Be sure to adjust the printer for the proper paper thickness before printing.

Important!

Keep the release lever in the forward position while printing on fanfold paper.

Image 9
Contents PT-10Y Anmerkungen Table of Contents PT-10Y Push Tractor Unit Installing the push tractor unitRemoving the push tractor unit from the printer Removing the push tractor unit from the printerPT-10Y Push Tractor Unit Loading fanfold paperLoading fanfold paper PT-10Y Push Tractor Unit Printing on fanfold paper Printing on fanfold paperPage Wichtig Installieren des SchubtraktorsDer PT-10Y-Schubtraktor Den Schubtraktor vom Drucker abmontierenEinlegen von Endlospapier Einlegen von EndlospapierDer PT-10Y-Schubtraktor Einlegen von Endlospapier Wichtig Bedrucken von Endlospapier Entparken von Endlospapier Endlospapier parkenBenutzung der Trennfunktion für Endlospapier Endlospapier parkenMécanisme tracteur poussant PT-10Y Installation du mécanisme tracteur poussantDépose du mécanisme tracteur poussant Dépose du mécanisme tracteur poussant18 Mécanisme tracteur poussant PT-10Y Chargement de papier en continuChargement de papier en continu 20 Mécanisme tracteur poussant PT-10Y Impression sur papier en continu Impression sur papier en continuRechargement du papier mis en attente Mise en attente du papierFonction de découpe rapide 22 Mécanisme tracteur poussant PT-10YImportante Installazione dell’unità di trascinamentoUnità di trascinamento PT-10Y Rimozione dell’unità di trascinamento dalla stampanteCaricamento della carta a modulo continuo Caricamento della carta a modulo continuoUnità di trascinamento PT-10Y Caricamento della carta a modulo continuo Importante Stampa su modulo continuo Ripristino del modulo continuo parcheggiato Parcheggio della carta a modulo continuoUtilizzo della funzione tear-off strappo Parcheggio della carta a modulo continuoCustomer service information