SATO LM400E manual Avoid dust, Keep out of direct sunlight

Page 12

Avoid dust

Dust buildup may result in poor print quality. This may cause not only malfunction but also shorten the life span of the printer.

Keep out of direct sunlight

This printer has a built-in optical sensor. Exposure to direct sunlight will make the sensor less responsive and may cause the label to be sensed incorrectly. Close the cover when printing.

Do not place the printer near crane or pressing machine.

Machineries such as crane and pressing machine require large amount of power. This may cause electrical noise or voltage reduction.

Avoid such locations to reduce the risk of malfunction or damage to the printer.

2

Image 12

Contents LM400e Series 438A Alexandra Road #05-01/04 Alexandra Technopark Singapore Features of LM400e Series Safety Precautions Place the printer on a surface that is flat and level Do not expose the printer to liquids or moistureDo not insert foreign material into the printer Use only the designated electrical power and voltage Connect ground wirePower cord Case of drop or damagePower supply Do not disassembleDo not use in locations with high humidity Carrying the printerSetting labels When unused for long periods of timeReplacing fuse CoverMaintenance and cleaning Table of Contents Precautions for installation and handling Keep the printer out of high temperature and humiditySelect a safe location Avoid dust Keep out of direct sunlightDo not place the printer near crane or pressing machine Power supply Connect the power cord to a grounded power outletUnpacking Accessories BoxNames of parts Label stopper Ｌｉｎｅ key Setting roll label Roll label Label stopper Label supply spindle Head lock lever Setting fan-fold label Label stopper Fan-fold label Slide guide Setting carbon ribbon Place an empty ribbon core on the ribbon take-up spindle Head lock lever Adjusting Pitch Sensor Turning on Power Connect the power cord and turn on the printerTurning the power on LM400e Series specifications Model LM408e / LM412e