4
Place the roll label on the label supply spindle.
Slide the label stopper and adjust to the label width.
Roll label
Label stopper
Label supply spindle
5
Thread the label under the label guide and pitch sensor.
Make sure that the side of label touches the guide roller slightly.
Caution
*Thermal head and the surrounding areas will become hot during the printing process. When changing the label after printing, be careful not to get burnt.
*Contacting the edge of thermal head with bare hands may result in injury.
When changing the labels, be careful not to get injured.
Label | Label guide |
Pitch sensor
Guide roller | Label guide |
10