SATO LM400E manual LM400e Series specifications, Model LM408e / LM412e

Page 31

LM400e Series specifications

Model:

LM408e / LM412e

Print method:

Thermal transfer / Direct thermal

Print resolution:

203/305dpi

8 dots mm/12 dots mm

Media size:

Max. 128mm

Width (including backing liner 131mm)

Printable area:

Max. 104mm width / Max. pitch 178mm

Max. print speed:

6 inch/s (approximately 150mm/sec)

Dimensions:

W271 x D430 x H321mm (Standard)

 

13kg (Standard)

 

Roll media:

Max. external diameter 8 inch (150m/roll)

 

Face in, 3 inch roll

Fan-fold:

Max. folded height 100mm, Feeding the fan-fold externally

Sensor type:

Toggles sensor between Reflective sensor/Transmissive sensor,

Carbon ribbon:

450m/roll

 

 

Note) Carbon ribbon width needs to be wider than media width.

Power:

110-220VAC±10% 50/60Hz±1%

Environment:

Operating

5 to 40 degrees C

 

Storage

-20 to 40 degrees C

 

Humidity

30 to 85% Non-condensing

21

Page 30 Page 32
Image 31
Page 30 Page 32
Contents LM400e Series 438A Alexandra Road #05-01/04 Alexandra Technopark Singapore Features of LM400e Series Safety Precautions Do not expose the printer to liquids or moisture Place the printer on a surface that is flat and levelDo not insert foreign material into the printer Case of drop or damage Use only the designated electrical power and voltageConnect ground wire Power cordCarrying the printer Power supplyDo not disassemble Do not use in locations with high humidityCover Setting labelsWhen unused for long periods of time Replacing fuseMaintenance and cleaning Table of Contents Keep the printer out of high temperature and humidity Precautions for installation and handlingSelect a safe location Keep out of direct sunlight Avoid dustDo not place the printer near crane or pressing machine Connect the power cord to a grounded power outlet Power supplyUnpacking Box AccessoriesNames of parts Label stopper Ｌｉｎｅ key Setting roll label Roll label Label stopper Label supply spindle Head lock lever Setting fan-fold label Label stopper Fan-fold label Slide guide Setting carbon ribbon Place an empty ribbon core on the ribbon take-up spindle Head lock lever Adjusting Pitch Sensor Connect the power cord and turn on the printer Turning on PowerTurning the power on Model LM408e / LM412e LM400e Series specifications
Top Page Image Contents