SATO MB400i, MB410i manual Buzzer sound mode setting, Change buzzer sound setting

Page 63

Buzzer sound mode setting

A buzzer can be sounded upon starting up the printer and upon errors. The buzzer is enabled by default. This can be enabled or disabled by the initial operation and by online command.

Change buzzer sound setting

(1)Disable buzzer sound

DSW-1,2,3,4=(OFF,OFF,ON,ON) + cover open + PRINT button + POWER

(2)Enable buzzer sound

DSW-1,2,3,4=(OFF,OFF,ON,ON) + cover open + FEED button + POWER

Processing setting

(STATUS LED flashes green)

Setting completes (STATUS LED lights green)

Note:

When the buzzer sound mode is enabled, the buzzer sounds upon startup.

Release the PRINT/FEED button to stop the buzzer. To check the settings for the buzzer sound setting mode, see the test print output (See P. 23). To end buzzer sound setting, confirm that the STATUS LED is on in green, then turn the power off. After changing the buzzer sound setting mode, be sure to restore the DSW to their original settings.

59

Image 63

Contents Quick Guide Page Table of Contents Operation with Bluetooth or Wireless LAN Preface For the Bluetooth or wireless LAN optionsPage Safety Precautions Markings and SymbolsSymbol examples Specific Warnings LiquidForeign Matter Disassembly Dropping and DamageAbnormal Conditions Battery Pack AC Adaptor / Battery Charger OptionLocation Specific CautionsThermal Head and Stepping Motor PowerTear-off Bar Replacing the Battery PackDo not place the printer in a hot or cold place Precautions in UseMaintenance and Cleaning Leaving the printer unused for a long timeUse the correct media Use the recommended accessoriesDo not disassemble or modify the printer Connect the correct cables to the external input terminalsUnpacking Names of Parts Label guide stopper Label width scale Names and Functions of Operating Parts Label guide Power buttonBattery cover Battery life indicator LEDPreparing for First-time Operation Charging the Battery PackCharging time Charging time Installing and Removing the Battery Pack Using the AC Adapter AC adapter DC input terminal DC output terminal Loading Labels Continuous Printing ModeLabel guide stopper Page Dispense mode printing Label guide stopper Page Page Page Turning the Power On Power onPower OFF Test Printing Operation with an RS-232C Cable Operation with a USB Cable USB cover USB cable Operation via Infrared Communica- tion Page Operation with Bluetooth or Wire- less LAN Removing printed labels When the next label is not printed Troubleshooting Status LED/buzzer Mode Content Cause Clearing Method When printing fails automatic printing DIP Switch section of , Refer Caring for the thermal head Daily CareCaring for the platen/dispenser roller/paper sensor User options ReferenceIncluded Items OptionsAC adapter for printer Battery charger singleFastening method Case with rain-resistant coverWaist case Does not fit over rubber boot USB cable RS-232C cablePrints the printer status Operation ModesPower saving mode Normal operation modeTest printing mode Feed button + Power on Changing the dispense mode printing setting Dispense mode printing Dispense mode printing settingDIP switch settings Head check setting modeChange online command setting Online command setting mode Online command setting detailsChange buzzer sound setting Buzzer sound mode settingStandard/non-standard code setting mode Standard/non-standard specificationsChange standard/non-standard code setting Setting DIP switch DIP SwitchDIP Switch Cover Key Startup Mode DIP Swith setting itemsBasic Specifications of MB400i/MB410i Head check/battery check/paper end/cover open/test USB MB400i MB410i Barcode Sato Contacts Sato Group of Companies